|
Post by Aleslammer on Jun 26, 2018 15:43:42 GMT -5
Checked a couple months ago remembering they were special order, when looking today were listed as available. Working on a repair order now.
|
|
|
Post by Macsbeach98 on Jun 26, 2018 17:04:47 GMT -5
Jesus thats no good Brad you havent had it all that long what was the warranty like on it?
|
|
|
Post by Aleslammer on Jun 26, 2018 17:27:18 GMT -5
One year, have had it about a year and 3 months . Was a refurb so didn't pay full price.
|
|
|
Post by Macsbeach98 on Jun 26, 2018 17:43:36 GMT -5
They might come good on it.
|
|
|
Post by Shadyreaper on Jun 26, 2018 18:09:30 GMT -5
Which one did you get ales?
|
|
|
Post by Aleslammer on Jun 26, 2018 18:19:27 GMT -5
Yea a little bummed but no different than toasting 7980XE and it's made a lot more points for me!!!!!!
|
|
|
Post by Mr.Scott on Jun 26, 2018 19:35:31 GMT -5
Bones / 960T @ 4518MHz / OCZ Reapers / Sabertooth 2.0 / 257.297 Using Micro XP from the Tiny XP 11 .iso Nice. So was I.
|
|
|
Post by Mr.Scott on Jun 26, 2018 19:38:55 GMT -5
I can't believe that failed Brad. It's a higher end unit. I hope they do something for you.
|
|
|
Post by Vinster on Jun 26, 2018 20:53:15 GMT -5
|
|
|
Post by ShrimpBrime on Jun 26, 2018 21:55:24 GMT -5
Scores updated.
|
|
|
Post by ving on Jun 27, 2018 7:46:14 GMT -5
It will be hard to beat Mr.Scott with x54*0(nh-d15)...~261s(ddr3) max so far Best regards
|
|
|
Post by Aleslammer on Jun 27, 2018 12:35:57 GMT -5
Sorry been busy, thinking the chiller just didn't respond well to all the on/offs for the RAM testing should of used the water cooler as I can reduce the noise level by turning the fans down.
|
|
|
Post by Vinster on Jun 27, 2018 15:42:38 GMT -5
it doesn't have a pump off switch? you have to turn the whole thing off?
did Koolance get back to you?
Vin
|
|
|
Post by Aleslammer on Jun 27, 2018 16:07:16 GMT -5
One switch controls it all, the pump is working fine problem is on the compressor side. After talking to Koolance repair bill might be cheaper than shipping.
|
|
|
Post by ving on Jun 27, 2018 20:30:00 GMT -5
ViNG/x5460@4750...AIR/Kingston HyperX 2133cl9/260.848s Best regards
|
|
|
Post by Vinster on Jun 27, 2018 20:46:52 GMT -5
Intel Represent...
Vin
|
|
|
Post by ving on Jun 27, 2018 22:22:13 GMT -5
Update. I don't like sandbagging.... ViNG/x5460@4800 AIR/Kingston HiperX2133cl9/257.335s Best regards:)
|
|
|
Post by ozz on Jun 28, 2018 1:33:38 GMT -5
this bloke had this and i was looking for another cpu , save me pulling the 980 BE out of the daily, he says 955BE, but the numbers are for a 1090T, and for $50, ive won either way, but if i get the 955, i can challenge, it clearly shows its a 1090T in the listing and pic,
|
|
|
Post by Macsbeach98 on Jun 28, 2018 2:03:32 GMT -5
It shows a pic of a 1090T but the MPN number HDZ955FBK4DGI is for a 955BE I would say its a 955BE
|
|
|
Post by ozz on Jun 28, 2018 2:17:22 GMT -5
It shows a pic of a 1090T but the MPN number HDZ955FBK4DGI is for a 955BE I would say its a 955BE yes pete in the product details, i saw that, problem hes got is hes posted a pic of the cpu as a 1090T, ive messaged the bloke, ill see what he says
|
|
|
Post by ShrimpBrime on Jun 28, 2018 16:51:48 GMT -5
ViNG your in! Scores have been updated!
|
|
|
Post by Macsbeach98 on Jun 28, 2018 17:01:41 GMT -5
It shows a pic of a 1090T but the MPN number HDZ955FBK4DGI is for a 955BE I would say its a 955BE yes pete in the product details, i saw that, problem hes got is hes posted a pic of the cpu as a 1090T, ive messaged the bloke, ill see what he says How many times have you seen that before the pic only has to resemble what you are going to get the big Chinese and the German sellers always do it like that.
|
|
|
Post by ShrimpBrime on Jun 28, 2018 17:08:29 GMT -5
Looking at needing 4.6ghz clocks and above. Got some better scores no first place though. Looks like you need some tweaks then. I will have first at 4.5 It seems you are correct sir. Managed to get some better frequency from this B97 which is great. However it won't do 4500mhz. I can post it, it will not run even a 32m WPrime though. Super unstable. So Here's what I've gotten. It's better. Satisfied actually. Could run this 4.3ghz all day too. But probably not stable enough at 4.4ghz. How I got 4479mhz.... well haven't been able to replicate it yet lol.
|
|
|
Post by Vinster on Jun 28, 2018 18:34:45 GMT -5
what was that in the bios? what was the cooling?
Vin
|
|
|
Post by Bones on Jun 28, 2018 19:18:16 GMT -5
Bones / 960T @ 4595MHz / OCZ Reapers / Sabertooth 990FX 2.0 / 253.14 The tower is doing it's job and doing it well. Doing these early in the morning is helping too.
|
|
|
Post by Mr.Scott on Jun 28, 2018 19:55:58 GMT -5
Nice!
|
|
|
Post by ShrimpBrime on Jun 28, 2018 20:32:29 GMT -5
what was that in the bios? what was the cooling?
Vin
What was voltage in bios? 1.725v Cooling is Geothermal or Tap to Drain liquid cooling. Modified ThermalTake Big Water SE block. Next best thing to a chiller but much easier and cheaper to operate. Good for Cpu clocks, cooling big wattage Peilters and multiple hw on the loop without a rad in sight. Low noise and very stable and constant water temp. Water Delta is about 48 deg F or Roughly 9c. As the summer goes on the Delta slowly rises. Overclocking was not done with software. I used the OC dial on the motherboard.
|
|
|
Post by Vinster on Jun 28, 2018 21:47:03 GMT -5
I'm trying really hard to get a AMD quad on time... my Gigabyte 790FXTA-UD5 is free'd up. I have a few kits of DDR3-2000Mhz and 1 kit of DDR3-2400Mhz...I just need a bloody ship. I have feelers out, no bites yet...
I have a 1090T 6 core, I'll run that (I know it doesn't qualify for the prize).. but I've owned this chip 8-10 years and never benched it.
Vin
|
|
|
Post by Macsbeach98 on Jun 28, 2018 22:02:17 GMT -5
Turn off 2 cores I think I heard Jon say that was Ok
|
|
|
Post by Vinster on Jun 28, 2018 22:13:37 GMT -5
Jon, is that acceptable? it says X4 or lesser.. this is an X6... doesn't seem right to me...
if you can get an X3 unlocked to an X4.. that I get...
Vin
|
|