|
|
Post by ShrimpBrime on Jul 22, 2020 20:59:31 GMT -5
August comp. Starts now, Ends August 31st AM4 only. Liquid cooling ambient only. (no chillers) Cpu frequency limitation - None Core and SMT reduction totally allowed. Benches: PiFast SuperPi 1M WPrime 32M Are the 3 stages. Lowest total time from all 3 benches wins. Submition like this. ShrimpBrime - 2700X @4ghz - G.Skill Trident Z @4ghz - ROG B450-I gaming - SCORE Typical Screen shot required. Do not need to see motherboard tab. Screen shot clipping is allowed. Old screen shots welcome if you can't beat an old score. Benchmate is Not required for W10 users. Just come in and have fun. All registered users are welcome, this comp is open to all. Anything you see you don't like, let me know. Will make changes as needed, but I think this one will be quick and fun. Game On!  _______ 1st Aleslammer AMD 3900X / CH VIII Hero / Pat RAM (Loose) Spi1M : 08.728 Pifast : 16.57 Wpr32 : 2.169 Total : 27.464s2st Fasttrack Ryzen 3950X / 4.4ghz for Wprime and 4.5ghz for PiFast and SPI 1m Asus Crosshair VI Mems running 4400 tight / 14-14-14-28-2T ( they can easily do 4933 / 14-13 but not on Crosshair VII Pifast 17.02 Wprime 1.637 SPI 1m 09.017 Total : 27.674s3rd Alpi Spi1M : 08.790
Pifast : 16.700
Wpr32 : 2.605Total : 28.095s
4th zila1 - 2700X @4200mhz - G.Skill FlareX @3466 - ROG Crosshair VII Hero -
Total 40.2565th Vinster - AMD 1700x @ 3.7Ghz, - Gkill 14-14-14-28 @ 3200Mhs, ROG Crosshair6 PiFast = 22.7 SuperPi = 11.795 WPrime32 = 11.532 46.027s |
|
|
|
Post by Vinster on Jul 23, 2020 14:30:20 GMT -5
I could partake in this one. Won't be pushed too hard as it's on my Daily. I might need help with SMT and other Overclocking tricks on this platform.
Vin
|
|
|
|
Post by ShrimpBrime on Jul 23, 2020 15:47:35 GMT -5
I could partake in this one. Won't be pushed too hard as it's on my Daily. I might need help with SMT and other Overclocking tricks on this platform. Vin Totally open no pressure comp. Probably run my 2700X for this one and won't be pushing hard on it either. Do you think I should restrict the thread count and/or core frequency Vin, or is it ok like this? |
|
|
|
Post by Vinster on Jul 23, 2020 16:04:12 GMT -5
it's ok like this. We're all friends right.. lol I'd be using my AMD 1700x... So I'd be going against your 2700x's added efficiency anyway. PiFast and SuperPi are single threaded anyway right... So even at the same clock I'd expect yours to score higher...  it's AM4, leave it at that. If you're worried then scale the Multi-treaded wprime score by the # of cores. (Stolen idea from OCN's usual comps) Does that make sense? I'm low on the benching pole, so I'm good with anything you want to run Jon... it's just for fun anyway. Vin |
|
|
|
Post by ShrimpBrime on Jul 23, 2020 16:43:34 GMT -5
We are going to get clobbered by 3900s, you know that right??
Haha, for sure Vin. We are definitely all friends!
|
|
|
|
Post by Vinster on Jul 23, 2020 21:01:06 GMT -5
I'm so out of touch I expect a i7-920 to beat me...  Vin |
|
|
|
Post by ShrimpBrime on Jul 26, 2020 10:01:37 GMT -5
ShrimpBrime - 2700X @stock 3.9ghz boost - Corsair LPX @1466mhz - ROG B450-I gaming - Wprime 32m 3.539s PiMod 10.633s Attachments:
|
|
|
|
Post by alpi on Jul 27, 2020 10:36:42 GMT -5
Looks good fun to me ! Spi 1M isn't any easy thing to made faster after a level with Zen2. Looks like it will need some new experiments and testings to became more familiar with those benchmarks in this platform ! Not a secret it's something that I really like to do ! |
|
|
|
Post by zila1 on Jul 29, 2020 21:25:18 GMT -5
Wprime 1.55 won't run on my rig. Says cpuz can't run on windows and shuts down. cpuz 1.92 installed.
|
|
|
|
Post by ShrimpBrime on Jul 30, 2020 8:36:05 GMT -5
Wprime 1.55 won't run on my rig. Says cpuz can't run on windows and shuts down. cpuz 1.92 installed. If your running windows 10, right click prime and run as administrator. |
|
|
|
Post by zila1 on Jul 30, 2020 11:43:45 GMT -5
Yup. That's what I've been doing but it hangs and says cpuz can't run on windows. Latest version installed. Oh well.
|
|
|
|
Post by georgekokovinis on Jul 30, 2020 13:56:04 GMT -5
3950X scores coming in soon |
|
|
|
Post by ShrimpBrime on Jul 30, 2020 15:07:00 GMT -5
Yup. That's what I've been doing but it hangs and says cpuz can't run on windows. Latest version installed. Oh well. Wprime uses version 1.44 cpuz. What won't run Eddie? Prime or cpuz? |
|
|
|
Post by zila1 on Jul 30, 2020 15:20:59 GMT -5
I just got back. I'm gonna check into this now. I think maybe something in my security suite might be stopping it.
Edit: CPUz just won't run on my system. Ran it as admin. Tried compatibility modes. Nuthin. Just says cpuz can't run on windows. Installed cpuz 1.44. Mine was a real old download so I thought maybe it was corrupt. So I redownloaded it and it's the same problem. Ran Wprime as admin again and it's the same issue over and over. I gave up on it.
|
|
|
|
Post by georgekokovinis on Jul 31, 2020 15:40:17 GMT -5
George Kokovinis ( Fasttrack ) Ryzen 3950X / 4.4ghz for Wprime and 4.5ghz for PiFast and SPI 1m ( Only Hyperthreading disabled - no core reduction - bored ) Asus Crosshair VII Mems running 4400 tight / 14-14-14-28-2T ( they can easily do 4933 / 14-13 but not on Crosshair VII ) Pifast 17.02 Wprime 1.637 SPI 1m 09.017    Windows 7 |
|
|
|
Post by ShrimpBrime on Jul 31, 2020 16:10:36 GMT -5
Nice!! I'll have the OP updated this evening.
Excellent runs George!!
|
|
|
|
Post by alpi on Aug 4, 2020 12:49:37 GMT -5
Here is my first bunch of results !  Spi1M : 08.790 Pifast : 16.700 Wpr32 : 2.605    hwbot.org/submission/4515430_hwbot.org/submission/4515431_hwbot.org/submission/4515432_All those were made on my 24/7 rig in my 24/7 os, only the lucky wallpaper was equipped.  Mem was a bit tightened ofc, just to made it a bit more direct.  (lol, just seen I've forgot to raise mem and fclk freq before wpr32 run.. ) Spi1M and Pifast with Boost, wprime with fixed set. Water cooled, temperated to my room-air at hot mid-summer. |
|
|
|
Post by ShrimpBrime on Aug 5, 2020 7:01:20 GMT -5
That looks good Alpi!! I'll be sure to get you in later today. Like that wall paper too! |
|
|
|
Post by alpi on Aug 5, 2020 7:57:31 GMT -5
That looks good Alpi!! I'll be sure to get you in later today. Like that wall paper too! Unreal paint skills revealed ! Can send You for some acceptable price if You want !  |
|
|
|
Post by ShrimpBrime on Aug 5, 2020 15:43:23 GMT -5
That looks good Alpi!! I'll be sure to get you in later today. Like that wall paper too! Unreal paint skills revealed ! Can send You for some acceptable price if You want ! Oh yes indeed!! Next comp, I may have to ask for a W9 background brought to you by Alpi!! You've been added to the first post. 2nd place! |
|
|
|
Post by ShrimpBrime on Aug 5, 2020 16:18:35 GMT -5
I just got back. I'm gonna check into this now. I think maybe something in my security suite might be stopping it. Edit: CPUz just won't run on my system. Ran it as admin. Tried compatibility modes. Nuthin. Just says cpuz can't run on windows. Installed cpuz 1.44. Mine was a real old download so I thought maybe it was corrupt. So I redownloaded it and it's the same problem. Ran Wprime as admin again and it's the same issue over and over. I gave up on it. Oh Eddie, You know that I'll still except benchmark scores without cpu-z!! If Cpu-id works, use that. Anything really. You have nothing to loose here. Whatever you want Eddie, it's cool with all of us for sure. no worries. |
|
|
|
Post by zila1 on Aug 17, 2020 19:55:31 GMT -5
|
|
|
|
Post by ShrimpBrime on Aug 17, 2020 20:12:22 GMT -5
zila1 - 2700X @4200mhz - G.Skill FlareX @3466 - ROG Crosshair VII Hero - 40.256 Hot Damn! There he is!! Love it!!  |
|
|
|
Post by zila1 on Aug 17, 2020 21:21:38 GMT -5
Seems a bit slow to me. But I had to take what I could get. I had a hell of a time trying to get Wprime to run. I think I might need a fresh install of my OS. I have to clean this rig up soon and then I'll do that. I have to bring 2700X rig number 2 out of it's slumber and update it first. It's been offline for months.
|
|
|
|
Post by ShrimpBrime on Aug 17, 2020 21:45:21 GMT -5
Yea the OS is giving you trouble for sure. Not a bad idea for a fresh install.
I didnt know you have 2 2700x rigs! Nice!
|
|
|
|
Post by zila1 on Aug 17, 2020 21:46:19 GMT -5
I want a 3000 Series Processor. I should be spanked for saying that. I don't need it. But I want it.
|
|
|
|
Post by ShrimpBrime on Aug 17, 2020 21:48:53 GMT -5
I want a 3000 Series Processor. I should be spanked for saying that. I don't need it. But I want it. Lol. I'd like to have one as well, but gonna sit on that for a while. The pricing is still steep. I miss the old amd chips for 125 bucks man. (FX) lol. |
|
|
|
Post by zila1 on Aug 17, 2020 22:06:52 GMT -5
Yeah, I know what you mean. I have several of those to play with. They were fun. I would need something more than 3700X though. As that would not be much of an upgrade for me. 3800X or better I'd say. And an RTX 2070 Super would suit me just fine.
|
|
|
|
Post by ShrimpBrime on Aug 17, 2020 22:24:33 GMT -5
Yeah, I know what you mean. I have several of those to play with. They were fun. I would need something more than 3700X though. As that would not be much of an upgrade for me. 3800X or better I'd say. And an RTX 2070 Super would suit me just fine. I think a 3900X would suit you really nicely, though may not clock as high, would have mad threads!! Probably look for a 3600X for the HTPC maybe next year. The 2700X games really well, it's just a little on the warm side. I love the thread count though, maybe a 3700X or 3800X after Zen3 releases would be a time to bite on that maybe. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 18, 2020 12:48:30 GMT -5
George Kokovinis ( Fasttrack ) Ryzen 3950X / 4.4ghz for Wprime and 4.5ghz for PiFast and SPI 1m ( Only Hyperthreading disabled - no core reduction - bored ) Asus Crosshair VII Mems running 4400 tight / 14-14-14-28-2T ( they can easily do 4933 / 14-13 but not on Crosshair VII ) Pifast 17.02 Wprime 1.637 SPI 1m 09.017 Windows 7 Can I ask what kind of voltage you need on DRAM at 4400 tight 2T? And do you mess with VTTDDR at all? Also, is it daily stable or bench stable? Thank you in advance. |
|
Mem was a bit tightened ofc, just to made it a bit more direct. 
(lol, just seen I've forgot to raise mem and fclk freq before wpr32 run.. )
