|
Post by Bones on Apr 24, 2020 14:15:23 GMT -5
That made a huge difference for you! Good work!
EDIT: Now I have work to do.....
|
|
|
Post by Macsbeach98 on Apr 24, 2020 23:49:59 GMT -5
My XPM 2800+ died today that will be the end for me. Good Luck everyone.
|
|
|
Post by cbjaust on Apr 24, 2020 23:57:55 GMT -5
My XPM 2800+ died today that will be the end for me. Good Luck everyone. Oof.
I'm finding out my NF7-S v2.0 is worse at Bus Speed than my AN7 (And neither seem to be all that great)
|
|
|
Post by Bones on Apr 25, 2020 1:10:32 GMT -5
OUCH! I'm sorry to hear it Mac.
|
|
|
Post by Mr.Scott on Apr 25, 2020 8:15:45 GMT -5
My XPM 2800+ died today that will be the end for me. Tough break. I've killed a few good ones too.
|
|
|
Post by Macsbeach98 on Apr 25, 2020 17:45:20 GMT -5
I am going to have find a couple they aint easy to find these days the only XPM's I have seen are in Germany.
|
|
|
Post by Bones on Apr 25, 2020 18:21:27 GMT -5
Will keep an eye out for you.
|
|
|
Post by Mr.Scott on Apr 25, 2020 20:05:32 GMT -5
Tough to come by for sure. I look all the time.
|
|
|
Post by cbjaust on Apr 26, 2020 11:34:20 GMT -5
Socket 754:PiFast 47.09s | cbjaust | Athlon 64 3400+ (Newcastle DH7-CG) | Abit KV8 Pro | Gainward GeForce 6800 GT (Golden Sample Ultra/2400) | OCZ Platinum Enhanced Latency DDR400 1GB CPU Frequency: 2762.16MHz | cbjaust | Athlon 64 3400+ (Newcastle DH7-CG) | Abit KV8 Pro | Gainward GeForce 6800 GT (Golden Sample Ultra/2400) | OCZ Platinum Enhanced Latency DDR400 1GB ( valid.x86.fr/lhx62r) Cinebench 2003: 391cb | cbjaust | Athlon 64 3400+ (Newcastle DH7-CG) | Abit KV8 Pro | Gainward GeForce 6800 GT (Golden Sample Ultra/2400) | OCZ Platinum Enhanced Latency DDR400 1GB Bench Setup:
I might try a 90nm Venice 3000+ and see if I can improve but in the mean time, woohoo, I'm not last in s754! . The only other s754 I have is a Sempron 3000+ with 128k L2 and a x9 multi.
|
|
|
Post by Mr.Scott on Apr 26, 2020 12:11:52 GMT -5
Good job Chris. Try that Venice core, I think you might be surprised.
|
|
|
Post by Mr.Scott on Apr 26, 2020 12:13:03 GMT -5
Socket A results Will update as we go. NF7-S rev2 / 2400+ XP-M / 6800 GT / Aqua = 69154
|
|
|
Post by Bones on Apr 26, 2020 21:40:18 GMT -5
Updated entries with results in 754 from cbjaust and standing by for the rest of the Socket A carnage from Mr. Scott.
|
|
|
Post by cbjaust on Apr 29, 2020 3:43:16 GMT -5
Updated Result: Socket 754
CPU Frequency: 2773.97MHz | cbjaust | Athlon 64 3400+ (Newcastle DH7-CG) | Abit KV8 Pro | Gainward GeForce 6800 GT (Golden Sample Ultra/2400) | OCZ Platinum Enhanced Latency DDR400 1GB ( valid.x86.fr/gnwf6z)
Same Setup:
Now I'll bung on an nF4 Lanparty and hope it boots Maybe I'll get to the Venice s754 before the end...
|
|
|
Post by terraraptor on Apr 29, 2020 11:48:48 GMT -5
Hi all. Was going to be more active in this comp but couldn't force myself to bench. So here is a single result just to express my respect to W9. Testing new a7n8x-e bios from digitalbath aka DDED. Athlon XP 2600+ (Barton) 250x11.5, 2-2-2-6 2x256MB - 30.10.000 in SuperPi 32M
|
|
|
Post by Mr.Scott on Apr 29, 2020 15:22:54 GMT -5
Fantastic ! Much respect to you also Terra. You are welcome here anytime you feel like it.
|
|
|
Post by d0minat0r on Apr 29, 2020 18:08:36 GMT -5
Brute force but no time to tweak
|
|
|
Post by d0minat0r on Apr 29, 2020 20:21:27 GMT -5
|
|
|
Post by alpi on Apr 30, 2020 0:49:33 GMT -5
One last wprime from me. My little Opteron with chiller. Unfortunatelly I didn't had time for this compo however I had plans. I woke up (nearly didn't sleep. ) and did at least one sub. Effort is super bad, chip gone pretty good at least. Alpi : Opteron 154 : Wprime = 1610.234
|
|
|
Post by cbjaust on Apr 30, 2020 15:04:47 GMT -5
Socket 9393D Mark03: 21156 marks | cbjaust | AMD Athlon 64 FX-55 (ADAFX55DAA5BN - San Diego) | DFI LANParty UT nF4 SLI-DR (U52596511) | GeIL One DDR GOW1GB3200DC 2x512MB 3.68v | ATi Radeon X1900 XT 512MB 1024M WPrime: 1675.250s | cbjaust | AMD Athlon 64 FX-55 (ADAFX55DAA5BN - San Diego) | DFI LANParty UT nF4 SLI-DR (U52596511) | GeIL One DDR GOW1GB3200DC 2x512MB 3.68v | ATi Radeon X1900 XT 512MB
3DMark05: 11109 marks | cbjaust | AMD Athlon 64 FX-55 (ADAFX55DAA5BN - San Diego) | DFI LANParty UT nF4 SLI-DR (U52596511) | GeIL One DDR GOW1GB3200DC 2x512MB 3.68v | ATi Radeon X1900 XT 512MB
Bench Setup:
|
|
|
Post by Macsbeach98 on Apr 30, 2020 17:40:24 GMT -5
I like looking at rig pics. Poor Alpi cant find a table and chair dont think my old knees would handle getting up and down off the floor to bench like that for long. And Chris he has got a Sata cable in Sata port 1 then he has got three other sata cables plugged into a sata card as well as a couple of IDE cables plugged in whats going on there it aint PCMark05.
|
|
|
Post by cbjaust on Apr 30, 2020 18:31:22 GMT -5
Wasn't sure which install would work. Gotta have options
Edit: Updated result Socket 939
1024M WPrime: 1665.140s | cbjaust | AMD Athlon 64 FX-55 (ADAFX55DAA5BN - San Diego) | DFI LANParty UT nF4 SLI-DR (U52596511) | GeIL One DDR GOW1GB3200DC 2x512MB 3.68v | ATi Radeon X1900 XT 512MB
No change to the SATA spaghetti mess
|
|
|
Post by alpi on Apr 30, 2020 20:00:58 GMT -5
I like looking at rig pics. Poor Alpi cant find a table and chair dont think my old knees would handle getting up and down off the floor to bench like that for long. And Chris he has got a Sata cable in Sata port 1 then he has got three other sata cables plugged into a sata card as well as a couple of IDE cables plugged in whats going on there it aint PCMark05. How Can I be higher than my pc ? What would it thinking ?
|
|
|
Post by Bones on May 1, 2020 0:08:04 GMT -5
Comp is now CLOSED! No more entries will be accepted.
Will double-check and tabulate the final results later today.
|
|
|
Post by cbjaust on May 1, 2020 0:31:21 GMT -5
Thanks Rodney for a cool comp.
|
|
|
Post by Bones on May 1, 2020 6:37:47 GMT -5
Thanks and congratulations to d0minat0r, the one that literally did as his namesake suggests - Dominating the comp in all categories to take the win outright!
|
|
|
Post by Macsbeach98 on May 1, 2020 6:40:45 GMT -5
Well done Dominator. It was a good fun comp Rodney I am sure everyone enjoyed it.
|
|
|
Post by Aleslammer on May 1, 2020 9:05:12 GMT -5
dOminatOr, indeed well done!!!!!
Bones, nice idea with the penalty bench and thanks for putting it on.
|
|
|
Post by Mr.Scott on May 1, 2020 15:24:19 GMT -5
Good comp Doc. Congrats Dom. Well done.
|
|
|
Post by d0minat0r on May 1, 2020 16:59:41 GMT -5
THX for all
|
|
|
Post by Bones on May 1, 2020 17:26:52 GMT -5
I'm glad you guys liked the idea I had for it. Would have done more myself but had too much going on to really take a stab at it. I do have a few hardware issues to work on anyway so I guess that's what I'll be doing before any more benching is done. Need to finish the Phantom, see if it works and then move onto the Sabertooth board.
|
|