|
Post by Bones on Apr 16, 2020 18:11:35 GMT -5
No prob Shrimpy - Just indicate it's and update and what socket it's for. I'm well aware of the 4 pic limit - Annoying but I guess we'll all just have to deal.
|
|
|
Post by Aleslammer on Apr 17, 2020 14:45:50 GMT -5
Socket 754 Aleslammer / 3400+ Venice / NF3 250 / CPUz = 3195.82 Aleslammer / 3400+ Venice / NF3 250 / CB 03 = 437 Aleslammer / 3400+ Venice / NF3 250 / Pifast = 41.98 valid.x86.fr/wz27eu
|
|
|
Post by Mr.Scott on Apr 17, 2020 15:29:56 GMT -5
Brad's on a mission. He's kickin my ass.
|
|
|
Post by cbjaust on Apr 17, 2020 16:11:23 GMT -5
Socket A:Aquamark: 62348 Marks cbjaust | Athlon XP-M 2500+ (Barton) | Abit AN7 | Gainward GeForce 6800 GT (Golden Sample Ultra/2400) | Corsair TWINX-3200XL 1GB 3DMark 2001 SE: 20905 Marks cbjaust | Athlon XP-M 2400+ (Barton) | Abit AN7 | Gainward GeForce 6800 GT (Golden Sample Ultra/2400) | Corsair TWINX-3200XL 1GB
32M SuperPi: 33m 45.984s cbjaust | Athlon XP-M 2500+ (Barton) | Abit AN7 | Gainward GeForce 6800 GT (Golden Sample Ultra/2400) | Corsair TWINX-3200XL 1GB
Bench Setup:
Had to take the cooling fan shroud (and the fans, obv.) off the video card because it would not clear the double height capacitor sticking up between the AGP slot and the IDE2 port.
|
|
|
Post by Aleslammer on Apr 17, 2020 16:23:07 GMT -5
Scott, Hadn't looked at the CB 03 scores here in depth, was trying to get by kotori's score on the bot. Then again I am trying along those lines. Got two BFG 7900 GTX cards coming from SoCal so yea I'm on mission .
|
|
|
Post by Mr.Scott on Apr 17, 2020 19:14:40 GMT -5
Had to take the cooling fan shroud (and the fans, obv.) off the video card because it would not clear the double height capacitor sticking up between the AGP slot and the IDE2 port. Had the same issue. Wound up replacing the stock cooler with an aftermarket Arctic Cooling model. Card actually runs cooler than with the stock one.
|
|
|
Post by sphincter on Apr 17, 2020 23:36:45 GMT -5
Spent tonight going over what you guys have been up to. fascinating to watch, A Dyno shootout for pc's.
|
|
|
Post by Bones on Apr 17, 2020 23:59:21 GMT -5
Feel free to join in if you have the hardware. Think of it as "Drag racing" a PC - My wife says that's what I'm doing when I'm benching.
|
|
|
Post by Mr.Scott on Apr 18, 2020 8:18:31 GMT -5
Feel free to join in if you have the hardware. Think of it as "Drag racing" a PC - My wife says that's what I'm doing when I'm benching. Mine says the same thing.
|
|
|
Post by Bones on Apr 18, 2020 12:07:05 GMT -5
May have to slap a supercharger on the 939 before it's over with. Depending on how things go here of course.
|
|
|
Post by Aleslammer on Apr 18, 2020 12:55:34 GMT -5
Drag racing is the comparison I use when explaining it folks.
I've got some Zalman GPU coolers I use, the larger rectangle as well as the round one and have used both for reasons posted and both have shown improved cooling over stock coolers.
As for on a mission hopefully I've sub'd a few things that put a hurt on the in the pockets ones to use Pete's phrase. Other than trying 939 again (3D03) what I got up is it. Although I've a couple 462 that were pretty happy on air so if the chiller makes a nice difference I might have a few pocket scores myself.
|
|
|
Post by sphincter on Apr 18, 2020 18:36:56 GMT -5
oh I'll be a designated spectator for a while yet, lol seatwarmer up at the top front corner of the bleachers, closest to the burnout box ofc that's my place atm. I havnt got much hangin around for hardware. just a p4 1.5 chip & soyo basic board from an old office mule , and a questionable x2 4600 amd chip.
|
|
|
Post by Macsbeach98 on Apr 18, 2020 19:42:15 GMT -5
As for on a mission hopefully I've sub'd a few things that put a hurt on the in the pockets ones to use Pete's phrase. Thats something Jr would say Brad. But dont worry I will be back for some burnouts and fast times before the end.
|
|
|
Post by dr4g00n on Apr 18, 2020 19:53:19 GMT -5
Here's my cruddy 754 chip, I can't get much more than 240fsb stable out of it on ambient. NewCastle 3200+ / nF3 250Gb CPU Freq: 2640MHz valid.x86.fr/cwi7ybCB 2003: 372pts Pifast: 48.69s
|
|
|
Post by Bones on Apr 18, 2020 21:16:17 GMT -5
oh I'll be a designated spectator for a while yet, lol seatwarmer up at the top front corner of the bleachers, closest to the burnout box ofc that's my place atm. I havnt got much hangin around for hardware. just a p4 1.5 chip & soyo basic board from an old office mule , and a questionable x2 4600 amd chip. Aww man.... Yer right in the sweet spot to catch a good wiff of all that beautiful tire smoke! Except in our case (Here) it ain't rubber....
|
|
|
Post by Macsbeach98 on Apr 19, 2020 1:14:06 GMT -5
Interesting this Drag racing analogy I might run Socket A on Nitro.
|
|
|
Post by Bones on Apr 19, 2020 4:13:06 GMT -5
Nitro eh? I can see it now.....
|
|
|
Post by Mr.Scott on Apr 19, 2020 8:01:29 GMT -5
Nitro eh? I can see it now..... It's not complete without the NightRider rant. lol I will have to go this route.
|
|
|
Post by Bones on Apr 19, 2020 11:37:07 GMT -5
And this would be me, trying to be competitive in the 3D parts of it.....
BONGO!
|
|
|
Post by Mr.Scott on Apr 22, 2020 15:54:02 GMT -5
Sorry Brad. Here is your next target for Wprime on 939. You can update my 939 sub if you like Doc.
|
|
|
Post by Aleslammer on Apr 22, 2020 16:08:10 GMT -5
I'm flat out impressed!!!!!
If I get a chance I'm going to try harder.
|
|
|
Post by Bones on Apr 22, 2020 17:05:27 GMT -5
Sorry Brad. Here is your next target for Wprime on 939. You can update my 939 sub if you like Doc. But of course - Done.
|
|
|
Post by Macsbeach98 on Apr 23, 2020 1:01:40 GMT -5
Here are my final 939 subs. Not happy with them but they will have to do. FX-57 LN2 / UltraD / 7900GTX
|
|
|
Post by Mr.Scott on Apr 23, 2020 16:07:35 GMT -5
You may not like them but, they make me feel pretty good about mine. My usual, doing more with less.
|
|
|
Post by Macsbeach98 on Apr 23, 2020 17:17:21 GMT -5
I marvel at your Wprime runs always. I didnt get as much out of clocking up the CPU in 3D as I thought I would.
|
|
|
Post by Mr.Scott on Apr 23, 2020 18:55:59 GMT -5
I didnt get as much out of clocking up the CPU in 3D as I thought I would. I didn't either. Matter of fact, I had a hard time even matching my air runs even though I was 150MHz faster. Rodney's planned benches for each platform was very well thought out.
|
|
|
Post by d0minat0r on Apr 24, 2020 4:58:31 GMT -5
|
|
|
Post by Macsbeach98 on Apr 24, 2020 6:12:14 GMT -5
Nice good start.
|
|
|
Post by d0minat0r on Apr 24, 2020 7:43:52 GMT -5
Card is maxed cpu can 100mhz more but need to bench 754 and 939 after that maybe back to 462
|
|
|
Post by Aleslammer on Apr 24, 2020 11:23:53 GMT -5
S939 update Got an idea a diver closer to 3DM03 release might be tuned a little better, GPUz don't like it much. Highest clocks I could set in Riva and pass the built in test, forgot how to turn it off!! 146 Opteron : A8N32-SLI Deluxe : Nvidia 7900 GTX : 3D03 = 25438
|
|