|
|
Post by ShrimpBrime on Nov 25, 2018 11:35:36 GMT -5
|
|
|
|
Post by Vinster on Nov 25, 2018 13:46:31 GMT -5
Win10 no liky.. won't let me launch it...
Vin
|
|
|
|
Post by zila1 on Nov 25, 2018 14:01:53 GMT -5
 I've been using that for the longest time now. It has been helpful in tuning in my ram. This is what my particular setup likes best. I had trouble getting it to work at first too, I don't remember what it is that I had to do to make it work. Maybe admin privileges did but I don't really remember off hand. This is my chips sweet spot.
|
|
|
|
Post by ksateaaa23 on Nov 25, 2018 15:08:58 GMT -5
have a problem with the board right now. will definitely try this one. ryzen likes fast memory and tight timings. posting 2 scores of spi32m. 1. ryzen 7 1700@ 4200mhz ram @ 1638 14-13-13-34-48-1t 8min28.405sec 2. ryzen 7 1700@ 4200mhz ram@ 1638 12-11-11-28-48-1t 8min19.357sec  Attachments:
|
|
|
|
Post by ShrimpBrime on Nov 25, 2018 15:58:08 GMT -5
Win10 no liky.. won't let me launch it... Vin Try run as administrator while using W7 compatibility mode. |
|
|
|
Post by Vinster on Nov 25, 2018 20:11:41 GMT -5
So does this app update timings? or does it give you recommendations? started reading the help sections and it's not clear to me what this is doing.Vin
EDIT: Ok, a few pages further in the thread, this app provides recommendations, you have to set them in Bios or your app of choice. crap I'm out of touch with new gear.
Vin
|
|
|
|
Post by zila1 on Nov 25, 2018 23:24:55 GMT -5
I use only the bios as I just don't like software clocking. I hate RyzenMaster.
The dram calculator and timing checker are very helpful. Finally got my latency down a little bit. Snappy.
|
|
|
|
Post by ksateaaa23 on Nov 26, 2018 2:38:18 GMT -5
I use only the bios as I just don't like software clocking. I hate RyzenMaster. The dram calculator and timing checker are very helpful. Finally got my latency down a little bit. Snappy. i was forced to use ryzen master. because board is useless board. don't have a manual voltage option and has offset of 0.300 and max is 1.45 to 1.47 in cpu-z can boot ryzen 7 1700 only around 4000mhz to 4040mhz. if i have to do 4200mhz etc. have to use ryzen master to push voltage. no other choice. board can do 1800 mem but ryzen master will work only with 1600 mem. so mem speed is compromised to get higher cpu clocks. |
|
|
|
Post by zila1 on Nov 26, 2018 11:53:55 GMT -5
Oh my gosh, in a situation like that then yes it's good that Ryzen Master is available. It helped you to achieve what you wanted and that's awesome. In my case I found it to be very unstable/glitchy. My board clocks real well in the bios. If this board had a bios similar to a Crosshair VI it would be perfect for me. For me, the board makes all the difference.  |
|
|
|
Post by ShrimpBrime on Nov 26, 2018 18:42:25 GMT -5
My board is fine. Ryzen Master is no different than any other software. Use when you have too. I don't use it, it's confusing and the GUI is horrible in design. It locked cores on me and I had to reset bios to recover from it.
With this Calculator, it doesn't set any settings that I can tell. But then again it's useless to me unless I can get a decent bios update. My Ryzen 1400 clocks memory speeds better than this 2700X right now, so in search of something anything to aid in better performance, I stumbled upon this Utility. It helps me little. At 2133Mhz I should have no issues running tight timings.
|
|
|
|
Post by zila1 on Nov 26, 2018 19:02:20 GMT -5
I'm wondering if it's your board more than the chip?
|
|
|
|
Post by Bones on Nov 26, 2018 19:24:03 GMT -5
While we're discussing RAM realted stuff, anyone need some good DDR2? Here's some - CHEAP. Better hurry - At this price it won't be around for long!
Free shipping too!  |
|
|
|
Post by zila1 on Nov 26, 2018 20:33:29 GMT -5
Oh my God!!!!
|
|
|
|
Post by ozz on Nov 26, 2018 20:44:50 GMT -5
ive got the exact same set i bought here in august this year for $30 aud delivered
|
|
|
|
Post by Vinster on Nov 26, 2018 22:04:15 GMT -5
ive got the exact same set i bought here in august this year for $30 aud delivered then pop them on ebay for 30K and reference that deal compared to these... they'll sell like hot cakes.. lol
Vin
|
|
|
|
Post by ozz on Nov 26, 2018 22:09:15 GMT -5
ive got the exact same set i bought here in august this year for $30 aud delivered then pop them on ebay for 30K and reference that deal compared to these... they'll sell like hot cakes.. lol
Vin
lol vin, havent even really tried em out yet , ive bought half a dozen or so sets of diff ddr2 ram in the last 6 mths or so |
|
|
|
Post by Macsbeach98 on Nov 27, 2018 0:15:11 GMT -5
I have got 2 sets of Corsair Cas 3 800 and 6 sets of Ballistix incoming at the moment as well as 4 sticks of Kingston HyperX DDR3 that are elpida Hyper chipped.  |
|
|
|
Post by ozz on Nov 27, 2018 0:39:03 GMT -5
I have got 2 sets of Corsair Cas 3 800 and 6 sets of Ballistix incoming at the moment as well as 4 sticks of Kingston HyperX DDR3 that are elpida Hyper chipped. mmm cas 3 800s, should be speedsters, hard to find |
|
|
|
Post by Macsbeach98 on Nov 27, 2018 6:34:16 GMT -5
Yep I should be able to get a couple of good sets of DDR2 out of that lot but I am more hoping the Hypers are good.
|
|
Nov 1, 2024 23:38:27 GMT -5
Nov 1, 2024 23:38:27 GMT -5
Oct 15, 2024 21:50:06 GMT -5
*
Oct 15, 2024 21:50:06 GMT -5
*