|
Post by Mr.Scott on Feb 17, 2018 8:05:35 GMT -5
Need a vcore mod for this board. Need to get into the 2.6v range. Data sheet is here. RC5058.pdf (261.71 KB) Pete?
|
|
|
Post by Macsbeach98 on Feb 17, 2018 22:50:12 GMT -5
Sorry I am late here pin 20 measure the resistance to ground with the CPU in the socket multiply by 25 and go from there. The diagram doesnt show any divider on the feedback circuit but that doesnt mean it doesnt have one. Also the vid signals go up to 3.5v in the diagram.
|
|
|
Post by Mr.Scott on Feb 18, 2018 7:45:30 GMT -5
Thank you Pete. I will be on that today. May need to boost the I/O volts also. One thing at a time.
|
|
|
Post by Mr.Scott on Feb 18, 2018 9:16:22 GMT -5
Getting 400 ohm's at pin 20 to GND. So...10K trimmer to pin 20 and GND.
|
|
|
Post by Macsbeach98 on Feb 18, 2018 9:33:25 GMT -5
Sounds good.
|
|
|
Post by Mr.Scott on Feb 18, 2018 9:35:22 GMT -5
Easy to get to at least. I'm on it.
|
|
|
Post by terraraptor on May 19, 2019 23:01:32 GMT -5
VID is the way to go with this board, at least the easiest one - the board features over- and under-voltage protection even with external vrm. IO didn't help me to gain more PCI.
|
|