|
Post by Shadyreaper on Oct 29, 2017 22:44:20 GMT -5
so today I went and picked up my b-day present early got a really great deal on a Asrock Z170M OC Formula with a 6700k ($250 not a bad deal right?) I also happen to grab that 50L dewar also today while I was getting the mobo and CPU I have no idea where to even start with this board lol it has so many damn bios settings so if anyone has one I will prob flood you with tons of questions Steponz aint gonna get no slack either for questions LOL Already insulated for me LOL the new CPU pot from David and the beast of a LN2 dewar 50L I found a canister that will fit down the neck so no need to pour that shit
|
|
|
Post by ving on Oct 30, 2017 6:02:20 GMT -5
Nice stuff
|
|
|
Post by Shadyreaper on Oct 30, 2017 7:03:07 GMT -5
thanks ving I been looking for something nice and new to bench with this about the newest stuff I could afford lol cant wait to bust into it and start benching it I have b-die mem but not that great of chips the guy I got the mobo from is gonna dig me up some nice ones it was cool as hell tho to see all the stuff Joe (steponz) had holy shit X299 with 18c and shit GTX 1080 ti KPEs those were super sweet he just broke the 2x vantage WR with the cards super cool to see all the different CPU and GPU pots he had there was stuff from the from door all the way to his benching room lmao
|
|
|
Post by Macsbeach98 on Oct 30, 2017 9:45:32 GMT -5
Good score Jas. I dont know about the canister to get it out of there though I take it the dewar has got a 50mm neck on it by the look of it so the canister probably holds about 1 liter at most and is on a stem like a specimen canister. Once you get it out you will have to pour it into a vacuum sealed thermos that would be fun holding the canister by the stem and pouring it into a vacuum sealed thermos especially while its brimming full. You would be spending half your time getting the nitrogen out of the dewar. And 1 liter doesnt last very long I have been through 30 liters in one arvo's session before a couple of times especially when I have got the card frozen as well as the CPU. Before I bought mine I was toying with the idea of a 50mm rubber bung with 2 holes in it and a copper pipe in one hole going down to the bottom of the dewar and a short pipe in the other hole connected to a t fitting with a release valve and a tyre valve on the other part of the t fitting connected to a foot pump give it a few pumps to pressurise the dewar and the nitrogen will will flow up out of the long copper pipe open the release valve and the flow stops. Then I seen a vid of Massman pouring straight from a dewar for an online competition and didnt worry about anything else. You will work out what works for you once you have got the dewar filled with Nitrogen. I would ask around what other people think.
|
|
|
Post by Shadyreaper on Oct 30, 2017 13:49:12 GMT -5
Good score Jas. I dont know about the canister to get it out of there though I take it the dewar has got a 50mm neck on it by the look of it so the canister probably holds about 1 liter at most and is on a stem like a specimen canister. Once you get it out you will have to pour it into a vacuum sealed thermos that would be fun holding the canister by the stem and pouring it into a vacuum sealed thermos especially while its brimming full. You would be spending half your time getting the nitrogen out of the dewar. And 1 liter doesnt last very long I have been through 30 liters in one arvo's session before a couple of times especially when I have got the card frozen as well as the CPU. Before I bought mine I was toying with the idea of a 50mm rubber bung with 2 holes in it and a copper pipe in one hole going down to the bottom of the dewar and a short pipe in the other hole connected to a t fitting with a release valve and a tyre valve on the other part of the t fitting connected to a foot pump give it a few pumps to pressurise the dewar and the nitrogen will will flow up out of the long copper pipe open the release valve and the flow stops. Then I seen a vid of Massman pouring straight from a dewar for an online competition and didnt worry about anything else. You will work out what works for you once you have got the dewar filled with Nitrogen. I would ask around what other people think. yea I have thought about just pouring it into the thermos but Im not gonna be able to pick it up over and over so I figured the can to dip it out til it gets lower then pour it from there I just called around for LN2 its $3 at both places trying to find out where Joe gets his so cheap at
|
|
|
Post by Macsbeach98 on Oct 30, 2017 15:44:17 GMT -5
Do they deliver if so that is why it might be that price Or you have got a Ute or Truck to pick it up in then it would be cheaper. You are not allowed to ride with it in a sedan or the same compartment that you are driving in.
|
|
|
Post by Shadyreaper on Oct 30, 2017 16:17:48 GMT -5
Do they deliver if so that is why it might be that price Or you have got a Ute or Truck to pick it up in then it would be cheaper. You are not allowed to ride with it in a sedan or the same compartment that you are driving in. yea I planned on picking it up in the truck from work not going in my car it was hard enough getting the dewar in my car empty LOL I am messing with the setup right now 6700k 4.9ghz 48 cache 1.392v not bad 4
|
|
|
Post by Bones on Oct 30, 2017 16:20:17 GMT -5
Get one of the "Pumps" for getting the LN2 out, saves the risk of a real tipover and makes it alot easier to do. It's similar to a dispensing spout and does basically the same thing. You just hold your container under the end of it and let the LN2 pour in. Since you have one as big as that one is do consider it's on wheels for a reason. Some probrably could tip it over no prob but why make it any harder on yourself that you have to?
I know they can be expensive but still cheaper than injury due to a spill..... Just sayin.
The one I have (27 ltr) can be tipped no prob but I've yet to use it, esp with things as they are here. However I'm gonna hang onto it and maybe one day finally get a chance to use it.
|
|
|
Post by Shadyreaper on Oct 30, 2017 18:07:23 GMT -5
yea I been looking at those too the pump would be nice to have been messing with 6700k 1.425v for CB15 at 4.9ghz does not like cache ratio changed at all 40 was that for that need some faster mem but gonna run this sucker on dice soon and see what she has before I dive into LN2 also first dibs on LN2 is my Celerons lol
|
|
|
Post by Shadyreaper on Nov 4, 2017 15:45:46 GMT -5
|
|