|
Post by Aleslammer on Mar 1, 2017 14:17:00 GMT -5
Mother Nature is about three times what it should be, probably reproduced a bugged run with the second one. Troll's Liar is pretty strong also and the last two are not consistent with the first two going to say bugged.
|
|
|
Post by Shadyreaper on Mar 1, 2017 14:21:26 GMT -5
Mother Nature is about three times what it should be, probably reproduced a bugged run with the second one. Troll's Liar is pretty strong also and the last two are not consistent with the first two going to say bugged. I restarted the PC and everything man I keep getting that high ass score in the 80k range this sucks man
|
|
|
Post by Aleslammer on Mar 1, 2017 14:38:50 GMT -5
Getting Test 4 with a higher frame rate than Test 1 is and improbability, it is odd that that it happened again after a reboot.
|
|
|
Post by Shadyreaper on Mar 1, 2017 14:50:21 GMT -5
oh well I aint gonna use the sub I dont feel like being called a cheater or nothing when I did the test multiple times to the same result now I am having a issue with getting the clock to adjust I try to set it above 837 and I gotta go to 852mhz before the clock will change then it jump to 864mhz and I cant get shit to run
|
|
|
Post by Macsbeach98 on Mar 1, 2017 15:46:33 GMT -5
Are you watching it run through it looks to be blacking out before the end of nature and it comes back with a highly elevated score in nature thats a common thing for 03. Its bugged anyway. Drop your core by 20mhz and you should get a valid score then bring it up by 5mhz and try again until it goes back to being bugged. With the clocks they do that you cant adjust them by 1mhz some jump in blocks of 10mhz to 15mh but that can vary from card to card.
|
|
|
Post by Shadyreaper on Mar 1, 2017 16:53:23 GMT -5
Are you watching it run through it looks to be blacking out before the end of nature and it comes back with a highly elevated score in nature thats a common thing for 03. Its bugged anyway. Drop your core by 20mhz and you should get a valid score then bring it up by 5mhz and try again until it goes back to being bugged. With the clocks they do that you cant adjust them by 1mhz some jump in blocks of 10mhz to 15mh but that can vary from card to card. ok that must be what is happening then I thought it was just changing benches cause it would say auto adjust on the screen like it was adjusting the rez for the load screen since it does that every load screen cause I wasnt really paying attention I wont use those subs thank you
|
|
|
Post by Macsbeach98 on Mar 1, 2017 17:31:11 GMT -5
No matter what your resolution is at when 3D03 starts it will automatically change the resolution to 1024x786 for the bench then automatically change it back when the bench is finished. With the old Radeons like we are running in Div7 if the bench crashes sometimes the resolution will stay at 1024x768 and you have to change it back yourself. Most futuremark benches do that automatically change the resolution it is illegal to change the benckmark setting so that the bench actually runs at the wrong resolution.
|
|
|
Post by Shadyreaper on Mar 1, 2017 17:47:46 GMT -5
No matter what your resolution is at when 3D03 starts it will automatically change the resolution to 1024x786 for the bench then automatically change it back when the bench is finished. With the old Radeons like we are running in Div7 if the bench crashes sometimes the resolution will stay at 1024x768 and you have to change it back yourself. Most futuremark benches do that automatically change the resolution it is illegal to change the benckmark setting so that the bench actually runs at the wrong resolution. its my TV I run on when I run the older cards it says auto adjust like its adjusting the TV rez to match what is being output since I run them on a VGA to my 4k TV I will take a picture and show you I run all the stock settings I dont change desktop rez it stays at 1080p I just ran it a little while ago again and I watched the screen turn black before it ended and it didnt say auto adjust like it normally does when it swaps to the loading screen ( loading screens are in like 1024x768) so it says auto adjust on my TV when the bench changes to the load screen before the next bench but the screen went blank for 15 secs before it said auto adjust so it did the bug yall were talking about
|
|
|
Post by Shadyreaper on Mar 1, 2017 23:42:20 GMT -5
you guys can delete this thread thanks
|
|