|
Post by Mr.Scott on Apr 23, 2016 18:07:46 GMT -5
Vdimm mod. Vcore mod. The VDimm mod is on the left. You can also see the Vcore voltmod over on the right just remove the Zero ohm resistor in that position (its got an 0 on it) and solder a 50k VR to the pads set to Zero ohms. Raise resistance to raise voltage.
|
|
|
Post by unityofsaints on Jul 11, 2020 8:32:57 GMT -5
Very nice, I have one of these but obviously the 1.3 Vcore limit is not enough. Now let's see if the VRM will hold up!
|
|
|
Post by Bones on Jul 11, 2020 12:53:19 GMT -5
Only one way to find out....
|
|
|
Post by Mr.Scott on Jul 11, 2020 13:38:13 GMT -5
I've been to 1.7v or a little better with no issues so.........
|
|
|
Post by ShrimpBrime on Jul 11, 2020 17:29:39 GMT -5
I've been to 1.7v or a little better with no issues so......... Daaauumm That's a good volt mod!
|
|
|
Post by Macsbeach98 on Jul 11, 2020 19:42:58 GMT -5
The Vcore mod will hold up to a 965Be cold 1.7v is about the limit of the mod though. That table in the second pic looks familiar Scotty.
|
|