|
Post by Shadyreaper on Nov 5, 2016 9:15:25 GMT -5
hey have any of you guys used OCZ Reaper PC2 6400 OCZ2RPR800C44GK 4-4-4 2.2v 2GB memory I seen there are tons of subs with this memory I never really messed with he ram but its something I am gonna start messing with maybe and a friend gave me one of these out of his old PC when he upgraded and I wanted to do 775 celly ds so and needed ddr2 so it was nice to get this esp free lol cant get yelled at for free stuff roflmao
|
|
|
Post by Mr.Scott on Nov 5, 2016 9:24:36 GMT -5
I have. I was less than impressed. Price is right though. They still draw a lot of money on e-bay.
|
|
|
Post by Shadyreaper on Nov 5, 2016 10:07:54 GMT -5
yea I cant argue with the price either its only 1 stick but I didnt care lol I thought it might be pretty decent once I seen the subs on hwbot after he gave it to me but once I get going I know I will have lots of memory questions lol I am just used to setting to default timings and go lol now with my X99 you just set the XMP and go lol I havent really even messed with my memory I set it to the 2400mhz XMP and ran with it but I have heard people getting 2800+mhz outta the GSkill Ripjaw V Model F4-2400C15D-16GVR DDR4 2400 (PC4 19200) Timing 15-15-15-35 Cas Latency 15 Voltage 1.2V
|
|
|
Post by Mr.Scott on Nov 5, 2016 11:37:35 GMT -5
Memory is the hardest thing to learn, by far. It's also the quickest way to wreck your OS. Don't experiment on your daily drive.
|
|
|
Post by Shadyreaper on Nov 5, 2016 12:47:46 GMT -5
Oh I don't plan on it lol that thing cost me too much lol I play way to many online games for that
|
|
|
Post by ozz on Nov 5, 2016 17:38:46 GMT -5
same as scotty, i have a set and wasnt impressed either, mine are just basics, ocz gold or platinums are a better choice i think, but the price was right
|
|
|
Post by Mr.Scott on Nov 5, 2016 17:43:10 GMT -5
Don't get me wrong, I've seen really good results from a few people with this ram. I can only tell you that my experiences were less than stellar. Probably just luck of the draw on kits is all, but it was enough where it put me off of them.
|
|
|
Post by ozz on Nov 5, 2016 17:53:35 GMT -5
yes scotty, the old story...silicon lottery
|
|
|
Post by Aleslammer on Nov 7, 2016 18:53:35 GMT -5
Always had a thing for Reapers and find 4 while looking for some DDR2 1200 so picked them up. PC2 9200 and the plastic protector over and the Ocz name was still present. Price seemed fair at $9 a stick.
|
|
|
Post by Shadyreaper on Nov 7, 2016 20:15:01 GMT -5
Damn yea I got the one for free but they want like 25$ a stick on eBay
|
|
|
Post by ozz on Nov 7, 2016 20:24:03 GMT -5
|
|
|
Post by Shadyreaper on Nov 7, 2016 20:32:36 GMT -5
Awesome I seen some OCZ platinum for $10 I was looking at the are PC2 6400 2.1v 4-4-4-15
|
|
|
Post by Macsbeach98 on Nov 8, 2016 2:16:52 GMT -5
Always had a thing for Reapers and find 4 while looking for some DDR2 1200 so picked them up. PC2 9200 and the plastic protector over and the Ocz name was still present. Price seemed fair at $9 a stick. Nice mine do Ok
|
|
|
Post by Aleslammer on Nov 8, 2016 10:03:35 GMT -5
Agree made Windows and able to move around at 608 all 5s no 4 & 5s on 5:6 and wouldn't post 1:1 all 4s @ 2.26v but they were setting some of the secondary timings pretty tight.
|
|
|
Post by Shadyreaper on Nov 8, 2016 12:48:14 GMT -5
|
|
|
Post by Mr.Scott on Nov 8, 2016 16:07:56 GMT -5
Those Platinum's are ProMOS chipped. 4-4-4-15 to around 860 or so.
|
|
|
Post by Shadyreaper on Nov 8, 2016 16:18:07 GMT -5
I ended up buying these for the mobo you are sending me to start with they are only 1 gig each but I figure it is a start plus I still got those ripjaws in my wifes PC lol
|
|
|
Post by Mr.Scott on Nov 8, 2016 17:51:29 GMT -5
Micron D9JNL chipped. 1600 @ 9-9-9-24 @ 1.5v Those might actually turn out to be decent, if you can run CL7 around 1600 @ 1.65-1.7v
|
|
|
Post by Shadyreaper on Nov 8, 2016 18:11:07 GMT -5
awesome so I got some good ones then they were only $9 for them lol with free shipping
|
|
|
Post by Macsbeach98 on Nov 9, 2016 1:58:11 GMT -5
They should go good with 775 my choice for 775 DDR3 would be Micron D9 or a set of Gskill PI. Forget TridentX and that super high frequency stuff tight timings @ 1600mhz is what you want.
|
|
|
Post by Shadyreaper on Nov 9, 2016 8:20:08 GMT -5
They should go good with 775 my choice for 775 DDR3 would be Micron D9 or a set of Gskill PI. Forget TridentX and that super high frequency stuff tight timings @ 1600mhz is what you want. I did see 1 stick of gskill pi too it was $9 so I got the 3 sticks instead I am excited to get some stuff to OC with and not worry about mishaps lol the OCZ DDR2 I bought will be here tomorrow the crucial DDR3 will be here prob friday or sat and I looked at those trident they just cost way too much
|
|
|
Post by alpi on Aug 12, 2017 5:42:47 GMT -5
I've got a ddr2 Reaper kit to test. I'ts such a crazy clocker ram. I wonder how high freqs it can do ! Unfortunatelly I have only a P35 board so it's limiting but the 1320 5-5-5-15 @ 2.1V is pretty impressive. Also can do 1080 mhz with 4-5-4-12 @ 2.2V.
|
|
|
Post by Mr.Scott on Aug 12, 2017 8:16:43 GMT -5
You found a good set. Most have been beat to shit already.
|
|
|
Post by Shadyreaper on Aug 12, 2017 9:54:23 GMT -5
nice man I need to get me 1 or 2 more sets or mem right now I am workin with a set of crucial 1333mhz and corsair 1800mhz and G.Skill 1866MHZ DDR3 I only got one set of DDR2 and that is the OCZ plats they were good for 1000mhz at 5-5-5-15-2 not really good with me yet just getting the hang of messing with the timings and getting them to rated speeds lol
|
|