|
|
Post by austin86 on May 13, 2024 12:55:50 GMT -5
abit ax8 with 3000+ 15$ram not included
ASUS A7N8X deluxe rev 1.4 with 2800+ Barton and and non barton 2400+ 15$
Will take 45$ for all 4 GPUs
FX5950u, delided with 40mm copper water block (I have the stock air cooler too)
winfast a380 fx5950u
gibibyte 8500le
Asus riva tnt 16mb
3 8800 GTX/ultra NOS full cover alphacool copper blocks. These blocks are new and never used, 15$ a pop or 30$ for all 3.
|
|
|
|
Post by austin86 on May 13, 2024 13:48:14 GMT -5
Wanted to add that I have a handful of CPUS and ram I can toss in with it if anyone needs it
|
|
|
|
Post by ShrimpBrime on May 14, 2024 12:51:50 GMT -5
It's tempting my old friend, No funds for PC hw this year.  |
|
|
|
Post by austin86 on May 14, 2024 17:09:15 GMT -5
It's tempting my old friend, No funds for PC hw this year. I'm always open to trades of you had anything you wanted to get rid of. |
|
|
|
Post by ShrimpBrime on May 14, 2024 19:27:39 GMT -5
It's tempting my old friend, No funds for PC hw this year. I'm always open to trades of you had anything you wanted to get rid of. I might have a couple of video cards. Think I have an RX 6500 XT collecting dust for example. |
|
|
|
Post by austin86 on May 14, 2024 23:44:20 GMT -5
hmm that's kinda new for my taste, got anything gf8, 9 or 2xx or ATIs equivalents?
BTW ill be listing an Asus Athlon XP board soon with 2 CPUs i forget what one was but one is a 2800+ Barton.
|
|
|
|
Post by MachineLearning on May 15, 2024 0:58:08 GMT -5
hmm that's kinda new for my taste, got anything gf8, 9 or 2xx or ATIs equivalents? BTW ill be listing an Asus Athlon XP board soon with 2 CPUs i forget what one was but one is a 2800+ Barton. Mmm... depending on which board, would probably be interested in the ASUS Athlon XP piece. |
|
|
|
Post by ShrimpBrime on May 15, 2024 1:04:44 GMT -5
hmm that's kinda new for my taste, got anything gf8, 9 or 2xx or ATIs equivalents? BTW ill be listing an Asus Athlon XP board soon with 2 CPUs i forget what one was but one is a 2800+ Barton. I'll have a look, get back to you later today. |
|
|
|
Post by austin86 on May 15, 2024 8:43:51 GMT -5
Take your time. I'm in no rush to sell them.
hmm that's kinda new for my taste, got anything gf8, 9 or 2xx or ATIs equivalents? BTW ill be listing an Asus Athlon XP board soon with 2 CPUs i forget what one was but one is a 2800+ Barton. Mmm... depending on which board, would probably be interested in the ASUS Athlon XP piece. I was going to ask 25$ for the Athlon board, its a ASUS A7N8X deluxe, I want to say rev 1.4 but I'll have to double check.
|
|
|
|
Post by MachineLearning on May 15, 2024 10:46:59 GMT -5
Take your time. I'm in no rush to sell them.Â
Mmm... depending on which board, would probably be interested in the ASUS Athlon XP piece. I was going to ask 25$ for the Athlon board, its a ASUS A7N8X deluxe, I want to say rev 1.4 but I'll have to double check.
Ah, I may not bite then because it's not NF2 Ultra 400. If it's rev. 2.0 then I will. But when you list it I'll let you know if I change my mind, assuming it's 1.4.  |
|
|
|
Post by austin86 on May 15, 2024 11:06:13 GMT -5
It's NF2 Ultra 400 board just a older revision if the chipset. it has dual channel ddr400 ram support right out of the box and with a bios update it fully supports 400fsb. but yeah I get it. I do have a rev 2.0 but it needs a few SMD caps replaced.
|
|
|
|
Post by MachineLearning on May 15, 2024 18:30:29 GMT -5
It's NF2 Ultra 400 board just a older revision if the chipset. it has dual channel ddr400 ram support right out of the box and with a bios update it fully supports 400fsb. but yeah I get it. I do have a rev 2.0 but it needs a few SMD caps replaced. Isn't it just NF2 400 non-Ultra? Which is still a good 462 chipset, I'd take it over VIA, but the Ultra 400 is doing better BCLK. I see only one person with plain 400 getting > 235MHz, and many with Ultra 400 getting 270-306. Correct me if I'm wrong since I haven't nearly done as much Socket A as I should. |
|
|
|
Post by ShrimpBrime on May 15, 2024 18:34:39 GMT -5
I don't have anything quite that old anymore.
NP GLWS!!
|
|
|
|
Post by MachineLearning on May 15, 2024 18:42:35 GMT -5
I don't have anything quite that old anymore. NP GLWS!! I still have your AGP GPUs you kindly passed on to me. Would be happy to trade a couple to Austin on your behalf, if you want the BX133 RAID. |
|
|
|
Post by ShrimpBrime on May 15, 2024 19:10:38 GMT -5
I don't have anything quite that old anymore. NP GLWS!! I still have your AGP GPUs you kindly passed on to me. Would be happy to trade a couple to Austin on your behalf, if you want the BX133 RAID. I'll live without it, not a big deal. It would collect dust for a while before I could get to benching it anyways. I appreciate the offer though!! |
|
|
|
Post by austin86 on May 15, 2024 21:31:53 GMT -5
It's NF2 Ultra 400 board just a older revision if the chipset. it has dual channel ddr400 ram support right out of the box and with a bios update it fully supports 400fsb. but yeah I get it. I do have a rev 2.0 but it needs a few SMD caps replaced. Isn't it just NF2 400 non-Ultra? Which is still a good 462 chipset, I'd take it over VIA, but the Ultra 400 is doing better BCLK. I see only one person with plain 400 getting > 235MHz, and many with Ultra 400 getting 270-306. Correct me if I'm wrong since I haven't nearly done as much Socket A as I should. hmm I think you are right, the chipset on the board say nForce2 SPP. odd that it can 400fsb wityh just a bios update |
|
|
|
Post by austin86 on May 16, 2024 13:11:10 GMT -5
I added some other bits and pieces
|
|
|
|
Post by austin86 on May 16, 2024 16:39:00 GMT -5
photos added
|
|
|
|
Post by MachineLearning on May 16, 2024 17:38:35 GMT -5
PM'd for XMS kit
|
|
|
|
Post by Macsbeach98 on May 16, 2024 20:53:04 GMT -5
I noticed them too but they are ver:2.2 could be any shit.
3500C2 are the good BH5
|
|
|
|
Post by austin86 on May 17, 2024 8:27:23 GMT -5
I noticed them too but they are ver:2.2 could be any shit. 3500C2 are the good BH5 IDK how well they clock I don't tend to OC ddr ram much. they came with a board I bought a ways back. I was like 10$ for a board with a cpu and XMS ram sure why not. 😅 Funny thing I picked up a 780a motherboard for 20 bucks last night wth a CPU, heatsink and ram too. I need to get off ebay lol, they're nickle and dimming me all day long with as cheap as old parts are anymore. |
|
|
|
Post by austin86 on May 21, 2024 11:08:33 GMT -5
I'll be keeping the 939 board to bench. I been needed a good bench setup since I killed the bio star board lol
|
|
|
|
Post by austin86 on Jun 5, 2024 8:54:18 GMT -5
back paddled on the ax8, ill be selling it, eye balling something else for benching
|
|
|
|
Post by austin86 on Jul 12, 2024 9:14:29 GMT -5
Last price drops
|
|
|
|
Post by ShrimpBrime on Jul 12, 2024 22:11:42 GMT -5
Lookin through my stuff, Got a Qnap TS-469 pro. Has 3 slides, one is missing and 2x 2.0 WD storage drives. Though I'd need to wipe the drives because there is sensitive information on them.
Interested?
|
|
|
|
Post by austin86 on Jul 15, 2024 8:10:33 GMT -5
Temping but no. thanks for the offer.
|
|
