|
|
Post by ShrimpBrime on Mar 20, 2021 20:51:56 GMT -5
55123 3DMarks Asus Strix GTX 980 (moded bios) 1398 Core 1868 Mem 1575 Shader 8700K 5800mhz LN2 Asus Maximus Hero X G.Skill 2066mhz 16-17-17  |
|
|
|
Post by freeagent on Mar 20, 2021 22:48:23 GMT -5
53158 3DMarks EVGA Classified GTX 980 1499 Core 2000 Mem 5600X 4800mhz Air Asus Strix B550-F G.Skill 1833mhz 14-14-14-34 Edit closed it before I submitted it dammit   |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 20, 2021 23:05:53 GMT -5
How do you download and run these 3D marks ?
I haven't had much luck getting them
|
|
|
|
Post by freeagent on Mar 20, 2021 23:10:20 GMT -5
I've had mine for eons, you can get them right from the old 3dmark site, and you get a key to unlock them now
|
|
|
|
Post by freeagent on Mar 21, 2021 0:35:12 GMT -5
I was able to squeeze a little more out of it, also updated to the newest driver and system info version. 53449 3DMarks EVGA Classified GTX 980 1497 Core 1951 Mem 5600X 4798mhz Air Asus Strix B550-F G.Skill 2000mhz 16-16-16-37 1T  |
|
|
|
Post by ShrimpBrime on Mar 21, 2021 1:04:52 GMT -5
I was able to squeeze a little more out of it, also updated to the newest driver and system info version. 53449 3DMarks EVGA Classified GTX 980 1497 Core 1951 Mem 5600X 4798mhz Air Asus Strix B550-F G.Skill 2000mhz 16-16-16-37 1T View AttachmentKill SMT and run only 6 cores and push Cpu frequency harder. Should bring the score up a bit. |
|
|
|
Post by ShrimpBrime on Mar 21, 2021 1:05:20 GMT -5
|
|
|
|
Post by Mr.Scott on Mar 21, 2021 7:56:42 GMT -5
Make sure you move the result tab off of the settings screen. You can't block anything. It will be flagged.
|
|
|
|
Post by freeagent on Mar 21, 2021 9:43:10 GMT -5
I was able to squeeze a little more out of it, also updated to the newest driver and system info version. 53449 3DMarks EVGA Classified GTX 980 1497 Core 1951 Mem 5600X 4798mhz Air Asus Strix B550-F G.Skill 2000mhz 16-16-16-37 1T View AttachmentKill SMT and run only 6 cores and push Cpu frequency harder. Should bring the score up a bit. I tried what you said, it is very difficult to nail down over 4825. I am not using curves or anything, treating it like an intel except I have a current limit I cant seem to get around. I was running SMT off @ 4900 1.45v and it tripped on the second CPU test. Made it a lot farther than before.. But at the same time it sort of feels like an AGESA issue, not sure. New update for B550 supposedly coming in April. I knew I should have got an X570. 53683 3DMarks EVGA Classified GTX 980 1497 Core 1990 Mem 5600X 4823mhz Air Asus Strix B550-F G.Skill 2000mhz 14-14-14-34 1T  |
|
|
|
Post by ShrimpBrime on Mar 21, 2021 9:47:58 GMT -5
Kill SMT and run only 6 cores and push Cpu frequency harder. Should bring the score up a bit. I tried what you said, it is very difficult to nail down over 4825. I am not using curves or anything, treating it like an intel except I have a current limit I cant seem to get around. I was running SMT off @ 4900 1.45v and it tripped on the second CPU test. Made it a lot farther than before.. But at the same time it sort of feels like an AGESA issue, not sure. New update for B550 supposedly coming in April. I knew I should have got an X570. 53683 3DMarks EVGA Classified GTX 980 1497 Core 1990 Mem 5600X 4823mhz Air Asus Strix B550-F G.Skill 2000mhz 14-14-14-34 1T View AttachmentIf you have Ryzen Master installed, increase the PPT and EDC limits in the gaming tab (pbo section). That should give you more power!! But so far, you've made improvements each try  good stuff chef! |
|
|
|
Post by freeagent on Mar 21, 2021 10:00:51 GMT -5
I tried what you said, it is very difficult to nail down over 4825. I am not using curves or anything, treating it like an intel except I have a current limit I cant seem to get around. I was running SMT off @ 4900 1.45v and it tripped on the second CPU test. Made it a lot farther than before.. But at the same time it sort of feels like an AGESA issue, not sure. New update for B550 supposedly coming in April. I knew I should have got an X570. 53683 3DMarks EVGA Classified GTX 980 1497 Core 1990 Mem 5600X 4823mhz Air Asus Strix B550-F G.Skill 2000mhz 14-14-14-34 1T View AttachmentIf you have Ryzen Master installed, increase the PPT and EDC limits in the gaming tab (pbo section). That should give you more power!! But so far, you've made improvements each try good stuff chef! Thanks buddy! I do not have it installed, I am doing all of my work in the bios, shit I didn't thinks those limits would be enabled once I took over manually. Ok.. back at er! after breakfast.. |
|
|
|
Post by ShrimpBrime on Mar 21, 2021 10:05:23 GMT -5
If you have Ryzen Master installed, increase the PPT and EDC limits in the gaming tab (pbo section). That should give you more power!! But so far, you've made improvements each try good stuff chef! Thanks buddy! I do not have it installed, I am doing all of my work in the bios, shit I didn't thinks those limits would be enabled once I took over manually. Ok.. back at er! after breakfast.. EDC is always locked even in manual mode. Just like your NV cards. Don't get more power until you move the slider. Sure you can OC the core, doesn't mean the power is there to do so. Yes eat. I'm going out for a few minutes anyways. BBL! |
|
|
|
Post by georgekokovinis on Mar 21, 2021 10:07:12 GMT -5
55123 3DMarks Asus Strix GTX 980 (moded bios) 1398 Core 1868 Mem 1575 Shader 8700K 5800mhz LN2 Asus Maximus Hero X G.Skill 2066mhz 16-17-17 View Attachment3d2006 Jon is not only cpu speed. Requires driver tweaking ( LOD +5 and to enable this you must set AA_MODE_REPLAY_ALL in Nvidia inspector ) 3d2006 also loves tight timings in mems. Lower mem speed and tighten up timings. Ideal would be 4000 / 12-12-12-28-1T. Win 7 of course, maxmem must be set to 4000mb to be able to boot. Kill all running apps and services before running. Also reduce screen to 1024 and try to use DVI connector ( if possible ). If you can do all the above you will be amazed |
|
|
|
Post by ShrimpBrime on Mar 21, 2021 10:27:04 GMT -5
55123 3DMarks Asus Strix GTX 980 (moded bios) 1398 Core 1868 Mem 1575 Shader 8700K 5800mhz LN2 Asus Maximus Hero X G.Skill 2066mhz 16-17-17 View Attachment3d2006 Jon is not only cpu speed. Requires driver tweaking ( LOD +5 and to enable this you must set AA_MODE_REPLAY_ALL in Nvidia inspector ) 3d2006 also loves tight timings in mems. Lower mem speed and tighten up timings. Ideal would be 4000 / 12-12-12-28-1T. Win 7 of course, maxmem must be set to 4000mb to be able to boot. Kill all running apps and services before running. Also reduce screen to 1024 and try to use DVI connector ( if possible ). If you can do all the above you will be amazed Just trying to get that Physics score up a little bit. |
|
good stuff chef!
