|
Post by Mr.Scott on Apr 26, 2017 19:22:59 GMT -5
Can't use a 3:5 ratio on 775 or 771 man. Frequency bug. It's incorrect. 2:3 is the usual remedy. You'd be flagged at HWB quicker than you could log off.
|
|
|
Post by Macsbeach98 on Apr 26, 2017 19:37:04 GMT -5
Nice. Edit: I forgot about the hardware bug with P45 and I have been caught out by it before. Thought it was to good to be true. Good Spotting Scotty.
|
|
|
Post by Shadyreaper on Apr 26, 2017 19:49:16 GMT -5
Can't use a 3:5 ratio on 775 or 771 man. Frequency bug. It's incorrect. 2:3 is the usual remedy. You'd be flagged at HWB quicker than you could log off. ? so you are telling me cause it says 3:5 ratio its not really 700mhz Ill fix it in a few thanks for letting me know before I did something stupid like sub it to the bot lmao
|
|
|
Post by Shadyreaper on Apr 26, 2017 22:43:00 GMT -5
lets try this again not as great as last time lmao but here it is Shadyreaper - Gig EP45C-UD3R - OCZ Platinum PC26400 - 600mhz validation valid.x86.fr/k70e02
|
|
|
Post by ShrimpBrime on Apr 27, 2017 0:49:40 GMT -5
UPDATE: After reading the thread through, 1M SuperPi as agreed in pre-comp thread. Mac'sBeach, you need to re-run that please. I apologize for the confusion. Willing to add time to the comp if any one so needs it for the mess up. Very sorry
|
|
|
Post by ozz on Apr 27, 2017 3:53:26 GMT -5
lets try this again not as great as last time lmao but here it is Shadyreaper - Gig EP45C-UD3R - OCZ Platinum PC26400 - 600mhz validation valid.x86.fr/k70e02good run shades, nice ram for 6400's too, i got a set of team extremes here thats supposed to do 1200+ but buggered if i can get em to do it on amd or intel, about 1100 was best i could get from em
|
|
|
Post by Macsbeach98 on Apr 27, 2017 3:59:56 GMT -5
Wait till I get a hold of that ram and board on Saturday Shane.
|
|
|
Post by Macsbeach98 on Apr 27, 2017 4:01:56 GMT -5
No worries Shrimp I will get it done. No skill in SPI 1m though. (just my opinion)
|
|
|
Post by Shadyreaper on Apr 27, 2017 5:14:12 GMT -5
I agree with Mac on the SPI 32M I spent 3-4 hrs yesterday to get the 32M time I got lmao back to the drawing board
|
|
|
Post by ShrimpBrime on Apr 27, 2017 7:34:51 GMT -5
No worries Shrimp I will get it done. No skill in SPI 1m though. (just my opinion) We where already agreed on 1M firstly in the pre comp thread. I also asked if any one had seen anything that may need added or changed and was ignored. Opinion wasn't needed. A good old fashioned hand job would have done the trick.
|
|
|
Post by Macsbeach98 on Apr 27, 2017 9:09:17 GMT -5
Dont worry Jon its not a problem I am the only one thats subbed a 32m sub. Actually I just seen 775 is part of Challenger so I will set it up at the start of the month.
|
|
|
Post by Shadyreaper on Apr 27, 2017 9:43:10 GMT -5
Dont worry Jon its not a problem I am the only one thats subbed a 32m sub. Actually I just seen 775 is part of Challenger so I will set it up at the start of the month. I actually was working on a 32M sub yesterday its all good tho
|
|
|
Post by ShrimpBrime on Apr 27, 2017 10:42:17 GMT -5
I am sorry guys. Really I am.
Need more time Shady, we can do that. Can extend to the 20th if you fellas would like me too. Just say the words dudes.
|
|
|
Post by Shadyreaper on Apr 27, 2017 11:50:02 GMT -5
nah I can run it again later working on catzilla right now
|
|
|
Post by Macsbeach98 on Apr 27, 2017 16:42:52 GMT -5
End it on the 10th Jon no need to extend it. I done those three runs I did in a couple of hours the longest thing was putting the air cooler on.
|
|
|
Post by ozz on Apr 27, 2017 18:06:56 GMT -5
ozz---GA EP45-UD3R---SLI NVIDIA 8500--OCZ2N1066SR2GK
|
|
|
Post by ozz on Apr 27, 2017 20:49:47 GMT -5
I agree with Mac on the SPI 32M I spent 3-4 hrs yesterday to get the 32M time I got lmao back to the drawing board ha, ive spent 3 days and nights tryin to work this bastard thing out all again, the ram settings stuff me up big time and i know its ram, 3 cpus all doin the same thing and 4 sets of ram later, im lucky to even get a sub in at this rate, the comp will be over be i even get it goin properly
|
|
|
Post by ozz on Apr 27, 2017 23:02:55 GMT -5
ozz--GAEP45-UD3R-- sli nvidia 8500--gskill tt's 8500's---catzilla 11561 i dunno what im doin here but im havin fun lol , tough bench, never tried it b4, seems cpu orientated
|
|
|
Post by Macsbeach98 on Apr 27, 2017 23:11:13 GMT -5
Shane that is 576p it says it just below your score in red. Is there a key folder in the Catzilla folder on your drive you have to click on upgrade and copy and paste the key in then you will be able to select 720p. If there is no key we will put it in tomorrow.
|
|
|
Post by ozz on Apr 27, 2017 23:19:13 GMT -5
Shane that is 576p it says it just below your score in red. Is there a key folder in the Catzilla folder on your drive you have to click on upgrade and copy and paste the key in then you will be able to select 720p. If there is no key we will put it in tomorrow. stuffed if i know pete , theres a key in the folder , i dunno where to put it and i never got any notification to put it in either, i copied and pasted the key to expect that but nothin come up so i just went with what i got, like i always do , im not worried about it, im havin a go at it, thats all that matters
|
|
|
Post by ShrimpBrime on Apr 27, 2017 23:47:13 GMT -5
ozz---GA EP45-UD3R---SLI NVIDIA 8500--OCZ2N1066SR2GK That's a damn nice chip you've got there. Sand-Bagging are we?
|
|
|
Post by Macsbeach98 on Apr 27, 2017 23:54:41 GMT -5
macsbeach98 - E8500 - Rampage Formula - SPI 9.172
|
|
|
Post by ozz on Apr 28, 2017 0:11:33 GMT -5
macsbeach98 - E8500 - Rampage Formula - SPI 9.172 i knew youd be close to the 9 or less mark pete, ive seen you work b4, youve done it too many times to know what not to do
|
|
|
Post by ShrimpBrime on Apr 28, 2017 1:20:29 GMT -5
That's a damn nice chip you've got there. Sand-Bagging are we? this sand baggin bullshit is really startin to piss me off, i never do that, i give what i got and what i can get at the time, and anyone has got better than me then post it, i do it all as it comes, always have . always will, same as any other comp ive been in or will go in, i dont give a fuck mate, if they got better they got better, i do me best with what i got regardless of the outcome, i hope this is all clear now , coz the next one that suggests i sandbag is gunna it get from my mouth big time, and i dont fuck about when i do it, if theyre good enough to catch and beat me then so be it, if they're not then so be it, i always play it the right way, im not good at this stuff, i just do what i get given, coz if this shit keeps on keepin on ill just pull out altogether and concentrate on other things EDIT Its meant to be a compliment. Your overclocks are far superior than most average people we've seen. Keep up the good work Ozz.
|
|
|
Post by Macsbeach98 on Apr 28, 2017 1:49:44 GMT -5
Shane I am coming over tomorrow arvo to help ya you will be right.
|
|
|
Post by ozz on Apr 28, 2017 18:55:15 GMT -5
this sand baggin bullshit is really startin to piss me off, i never do that, i give what i got and what i can get at the time, and anyone has got better than me then post it, i do it all as it comes, always have . always will, same as any other comp ive been in or will go in, i dont give a fuck mate, if they got better they got better, i do me best with what i got regardless of the outcome, i hope this is all clear now , coz the next one that suggests i sandbag is gunna it get from my mouth big time, and i dont fuck about when i do it, if theyre good enough to catch and beat me then so be it, if they're not then so be it, i always play it the right way, im not good at this stuff, i just do what i get given, coz if this shit keeps on keepin on ill just pull out altogether and concentrate on other things EDIT Its meant to be a compliment. Your overclocks are far superior than most average people we've seen. Keep up the good work Ozz. all good shrimpy, i get it, i understand now , sorry for havin a bit of a dummy spit over nothin, my fault brother
|
|
|
Post by ozz on Apr 28, 2017 19:13:48 GMT -5
Shane I am coming over tomorrow arvo to help ya you will be right. righto pete, i gotta go to st huberts to look at a bore for a mate, ill be back by 12-12.30
|
|
|
Post by ozz on Apr 29, 2017 3:23:42 GMT -5
|
|
|
Post by ozz on Apr 29, 2017 3:27:16 GMT -5
i havent got the card to do it but Ozz -- E8500 -- R9-280X -- EP45-UD3R -- Catzilla 720p 12448
|
|
|
Post by Macsbeach98 on Apr 29, 2017 5:22:14 GMT -5
I am in love with that ram they will bench at 700mhz with a secondary memory Tweak or 2.
|
|