|
|
Post by MachineLearning on Feb 18, 2024 12:53:01 GMT -5
Very new to DDR5, squeezed this out of a Klevv Bolt V stick hwbot.org/submission/5485924_Marketed as 10L, arrived as 8L, so swapping out for Team Group A-die. Hope they do about as well but we'll see. |
|
|
|
Post by georgekokovinis on Feb 18, 2024 13:49:11 GMT -5
Ddr5 8400 cl32 1.35v  Did you verify this ? Amazing score btw on air. Congrats. Btw, do you mind sharing the voltages you used ? Bravo Tristan !!! |
|
|
|
Post by MachineLearning on Feb 18, 2024 14:03:34 GMT -5
Ddr5 8400 cl32 1.35v Did you verify this ? Amazing score btw on air. Congrats. Btw, do you mind sharing the voltages you used ? Bravo Tristan !!! Unfortunately, I did not... and, I already packed up and shipped the sticks back, so cannot test now. Frankly? It was a decision driven by emotion, and maybe a mistake. Will see how the new sticks do. From what I hear A-die is rather consistent. I hope for 10600 again. The memory controller is the star of the show here. From memory... VDDIO 1.35v, VDD 1.80v, VDDQ 1.45v (board cannot set 1.36-1.43v here), VPP 1.8v, VDDP 1.2v, VSOC 1.3v. VDDP @ 1.2v was crucial to going from 9200MHz to 10600. Saw 10800, could not get to Windows. |
|
|
|
Post by georgekokovinis on Feb 18, 2024 14:06:46 GMT -5
Correction, lol.
My old tired eyes saw 8400.
It is 6400.
This makes your achievement even bigger.
Single stick ?
|
|
|
|
Post by MachineLearning on Feb 18, 2024 14:10:48 GMT -5
Correction, lol. My old tired eyes saw 8400. It is 6400. This makes your achievement even bigger. Single stick ?  That is correct. Nearest slot to CPU (A1), B650M-HDV/M.2. Further slot was about -200MHz. One stick did 10600 POST, no boot, other 10800 POST, no boot. I will find out at the end of the week if I fucked up by returning the kit. |
|
|
|
Post by georgekokovinis on Feb 18, 2024 14:12:01 GMT -5
My man, You bastard, lol You pushed 1.80v VDD thru the stick on air And it is alive ? WOW . |
|
|
|
Post by MachineLearning on Feb 18, 2024 14:14:09 GMT -5
My man, You bastard, lol You pushed 1.80v VDD thru the stick on air And it is alive ? WOW . Indeed  Not only alive, but 0 degradation. I even pushed 1.95v VDD through it briefly, no benefit so back to 1.8v. A-die don't care. lol |
|
|
|
Post by georgekokovinis on Feb 18, 2024 14:20:28 GMT -5
My man, You bastard, lol You pushed 1.80v VDD thru the stick on air And it is alive ? WOW . Indeed Not only alive, but 0 degradation. I even pushed 1.95v VDD through it briefly, no benefit so back to 1.8v. A-die don't care. lol I am not so sure if A-die care or not for such voltages Anyway, just AMAZING. |
|
|
|
Post by MachineLearning on Feb 18, 2024 14:30:36 GMT -5
Indeed Not only alive, but 0 degradation. I even pushed 1.95v VDD through it briefly, no benefit so back to 1.8v. A-die don't care. lol I am not so sure if A-die care or not for such voltages Anyway, just AMAZING. And, maybe the TeamGroup can beat it. |
|
|
|
Post by georgekokovinis on Feb 18, 2024 15:00:42 GMT -5
I have Teamgroup T-force delta rgb rated at 7800 cl 38-48-48-96 2T at 1.40v.
On Apex encore my daily setup is 8200 36-48-48-40 with 1.41vdd and 1.41vddq.
Tight, but not too tight.
For benching, after numerous scenarios I adopted 8466 34-48-48-40 tight with 1.51vdd and 1.50vddq with memory controller at 1.4v and vccsa at 1.275v.
This gives me 138gb memory read and 49 ms latency.
Rtl/iol are very good at 70/25 and 65/25.
I am very satisfied with this setup.
Very stable.
Can run for hours, boots right up and reboots right up.
|
|
|
|
Post by MachineLearning on Feb 18, 2024 15:26:11 GMT -5
I have Teamgroup T-force delta rgb rated at 7800 cl 38-48-48-96 2T at 1.40v. On Apex encore my daily setup is 8200 36-48-48-40 with 1.41vdd and 1.41vddq. Tight, but not too tight. For benching, after numerous scenarios I adopted 8466 34-48-48-40 tight with 1.51vdd and 1.50vddq with memory controller at 1.4v and vccsa at 1.275v. This gives me 138gb memory read and 49 ms latency. Rtl/iol are very good at 70/25 and 65/25. I am very satisfied with this setup. Very stable. Can run for hours, boots right up and reboots right up. Ah, that's a good kit and a great setup. Especially for rock-solid daily. 49ms latency is impressive. Out of curiosity, around when was your kit manufactured? I must admit I don't know anything about DDR5 except max frequency. And even that's only with the 8000 APUs. |
|
|
|
Post by georgekokovinis on Feb 18, 2024 15:37:34 GMT -5
Six months ago purchased.
Manufacturing date is August 2023.
|
|
|
|
Post by georgekokovinis on Feb 18, 2024 16:23:18 GMT -5
N.B.
Of course I am available for help if and when needed, although I have no experience of AM5.
|
|
|
|
Post by MachineLearning on Feb 18, 2024 17:03:27 GMT -5
N.B. Of course I am available for help if and when needed, although I have no experience of AM5. Thank you kindly, George. |
|
|
|
Post by MachineLearning on Feb 22, 2024 15:40:17 GMT -5
Aaaah, now that's better. 10800MHz ambient. hwbot.org/submission/5489510_Two things I have learned. 1. Klevv Bolt V 6800MHz CL34 is ACTUALLY 10-layer. The sticks also both top out @ 10800. IMO, this is an IMC limitation. 2. My sample of TeamGroup T-Create 6400CL32 is utter trash. Won't even POST 9000MHz with similar settings to the Klevv. If you are buying cheap A-die, I recommend the Klevv. It's not a whole lot more expensive than the T-Create, but stands head and shoulders above it. |
|
|
|
Post by twopic on Feb 25, 2024 19:09:54 GMT -5
Very new to DDR5, squeezed this out of a Klevv Bolt V stick hwbot.org/submission/5485924_Marketed as 10L, arrived as 8L, so swapping out for Team Group A-die. Hope they do about as well but we'll see. Nice job MachineLearning! You are better than me at ddr5 the highest I got on my z690 dark was around 8400. |
|
|
|
Post by MachineLearning on Feb 25, 2024 19:13:07 GMT -5
Very new to DDR5, squeezed this out of a Klevv Bolt V stick hwbot.org/submission/5485924_Marketed as 10L, arrived as 8L, so swapping out for Team Group A-die. Hope they do about as well but we'll see. Nice job MachineLearning! You are better than me at ddr5 the highest I got on my z690 dark was around 8400. Thank you! But it could just as easily be your sticks. Like I mentioned, the TeamGroup A-die I had wouldn't even POST 9000. If you're in the market for A-die try these out for frequency: a.co/d/aE22nyG |
|
|
|
Post by twopic on Feb 28, 2024 0:31:06 GMT -5
I've never heard of Klevv before hand but you got to give anything a chance! Thanks for letting in on the secrets.
|
|
|
|
Post by MachineLearning on Feb 28, 2024 8:08:07 GMT -5
I've never heard of Klevv before hand but you got to give anything a chance! Thanks for letting in on the secrets. Klevv is owned by Essencore, which is part of SK Group (owners of SK Hynix). It's somewhat similar to, but more disjointed than, Crucial & Micron's relationship. |
|
|
|
Post by georgekokovinis on Feb 28, 2024 8:42:38 GMT -5
The world n.1, Splave ( Alan ) is benching only with Klevv mem sticks.
This means a lot.
|
|
|
|
Post by MachineLearning on Feb 28, 2024 8:49:48 GMT -5
The world n.1, Splave ( Alan ) is benching only with Klevv mem sticks. This means a lot. This does not surprise me. (Very limited) Personal experience: Out of 4 Bolt V, both 10-layer sticks hit 10800, one 8-layer hit 10400, the other 10600. Klevv is doing good work with their DDR5. |
|
|
|
Post by georgekokovinis on Feb 28, 2024 9:00:21 GMT -5
The world n.1, Splave ( Alan ) is benching only with Klevv mem sticks. This means a lot. This does not surprise me. (Very limited) Personal experience: Out of 4 Bolt V, both 10-layer sticks hit 10800, one 8-layer hit 10400, the other 10600. Klevv is doing good work with their DDR5. Alan ( 12 years personal friend ) e-mailed me months ago, a PY prime 32B run at 8000 cl 26-26-26-36-2T. He never submitted it for unknown to me reasnons/ Legit 110% with Benchmate and screenshot. I do not know if it had to do with his move from OCN to Wegg, because it was during that period. Cpu was under LN2 and sticks on air !!! |
|
|
|
Post by twopic on Feb 29, 2024 1:22:52 GMT -5
I've never heard of Klevv before hand but you got to give anything a chance! Thanks for letting in on the secrets. Klevv is owned by Essencore, which is part of SK Group (owners of SK Hynix). It's somewhat similar to, but more disjointed than, Crucial & Micron's relationship. Thanks! Currently I was looking at Gskill kits but Klevv might be a nice alternatives since 24m kits are still expensive ~200. Who knows I might even get a z790 once they are in stock again! I can see why Luumi likes them. |
|
|
|
Post by MachineLearning on Aug 9, 2024 15:44:12 GMT -5
Here is (basically) 11000MHz on ambient. 2MHz off from the highest AMD ambient mem freq, 3rd highest AMD mem freq overall. hwbot.org/submission/5616690_I thank alex2305 for his advice, patience, and support. RAM is Patriot Viper Xtreme 5 8200MHz CL38. |
|
|
|
Post by georgekokovinis on Aug 9, 2024 17:18:25 GMT -5
Here is (basically) 11000MHz on ambient. 2MHz off from the highest AMD ambient mem freq, 3rd highest AMD mem freq overall. hwbot.org/submission/5616690_I thank alex2305 for his advice, patience, and support. RAM is Patriot Viper Xtreme 5 8200MHz CL38. Pfff, lol. 11.000 Why not 12.000 ? Oh my, I think I will faint. |
|
|
|
Post by MachineLearning on Aug 9, 2024 17:48:45 GMT -5
Here is (basically) 11000MHz on ambient. 2MHz off from the highest AMD ambient mem freq, 3rd highest AMD mem freq overall. hwbot.org/submission/5616690_I thank alex2305 for his advice, patience, and support. RAM is Patriot Viper Xtreme 5 8200MHz CL38. Pfff, lol. 11.000 Why not 12.000 ? Oh my, I think I will faint. Once I win the lottery, and I buy 1,000L LN2 + 100 8500G's and Patriot 8200 C38's, I'll hit 12k. |
|
|
|
Post by ShrimpBrime on Aug 9, 2024 22:48:38 GMT -5
Certainly live up to MachineLearning. It suits you, glad you kept that screen name.
Nice clocks young man!
|
|
|
|
Post by MachineLearning on Aug 10, 2024 1:38:53 GMT -5
Certainly live up to MachineLearning. It suits you, glad you kept that screen name. Nice clocks young man! Thank ya kindly. I'm glad I changed it back too. |
|
|
|
Post by MachineLearning on Sept 7, 2024 6:49:26 GMT -5
Okay, my last submission wasn't fully validated through CPU-Z so I did it again... but slightly better: hwbot.org/submission/5639015_Finally top 10 global and #2 for AMD CPUs. |
|
|
|
Post by alex2305 on Sept 7, 2024 16:35:57 GMT -5
Okay, my last submission wasn't fully validated through CPU-Z so I did it again... but slightly better: hwbot.org/submission/5639015_Finally top 10 global and #2 for AMD CPUs. You need to get 24gb sticks binned for more.... |
|
Not only alive, but 0 degradation.
