|
Post by freeagent on Apr 6, 2021 20:56:05 GMT -5
See man, that was pretty easy Edit: I think my best latency was with a San Diego 3700 @ 29.9ns running @ 240MHz 2-3-3-6 I could be full of shit, but I'm pretty sure that was the CPU..
|
|
|
Post by ShrimpBrime on Apr 6, 2021 21:04:59 GMT -5
Intel super easy to get low latency. Here's the daily clocks from once input. Been running this way a while now.
|
|
|
Post by ShrimpBrime on Apr 6, 2021 21:05:43 GMT -5
I think my best latency was with a San Diego 3700 @ 29.9ns running @ 240MHz 2-3-3-6 I could be full of shit, but I'm pretty sure that was the CPU.. That's pretty impressive. SS or it didn't happen
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 7, 2021 0:06:09 GMT -5
Decided to do some overclocking with the Intel. Haven't used this for almost 4 or 5 months so bit of a learning curve again.
|
|
|
Post by freeagent on Apr 7, 2021 6:20:57 GMT -5
I think my best latency was with a San Diego 3700 @ 29.9ns running @ 240MHz 2-3-3-6 I could be full of shit, but I'm pretty sure that was the CPU.. That's pretty impressive. SS or it didn't happen I know right? That was back when it was just Everest.. not sure if it would be comparable to what we have today. I don't have a screen so it didn't happen It might have even been in the 28ns zone. Because I remember when I got DDR2 and not getting those results I was pretty choked lol. That was on an Abit AN8 Fatality I believe..
|
|
|
Post by alpi on Apr 27, 2021 17:53:20 GMT -5
It's my daily. With coffee lake what is the best Intel architecture (possibly) for low latency.
|
|
|
Post by freeagent on May 15, 2021 22:23:03 GMT -5
Lol I like how low latency comes so easy on Intel, AMD really makes you work for it!
|
|
|
Post by Vinster on May 16, 2021 22:41:47 GMT -5
^ Right.. lol
Vin
|
|
|
Post by freeagent on May 16, 2021 23:08:59 GMT -5
I broke into the 40s once, but had to do it in safe mode.. 49.8 or maybe a touch lower.. I have the screen somewhere.. Meanwhile I've been at least in the 50s since 775 broke into the lower 40s with X58, lower 30s with Z77, but had to feed the BBSE to do it.. 1.725 1066 8-9-8.. I am still curious if I had bought Intel instead of AMD what kind of latencies I would be looking at. I would have gotten a tenix, maybe stretch to tenseven.. Maybe I will piece together an Intel. I still feel like I have to be a little dainty with this.. where I know Intel can take a bit of a beating. Although to be fair I did rough this one up a little trying to reach for the stars.. but she still good. can still run some stuff at 2100 1:1 so pretty sure its an AGESA thing. Would be nice though, this ram rips..
|
|
|
Post by freeagent on May 18, 2021 11:12:46 GMT -5
I think this maybe the lowest I have been in windows with an AMD..
|
|
|
Post by Vinster on May 18, 2021 13:56:25 GMT -5
That's pretty good. my best with my 5800x and X570 was in the 53ns. I need to play with my 1700x/X370 when I can to see what I can do with it. but I doubt it would be that low.
Vin
|
|
|
Post by zila1 on May 18, 2021 14:04:41 GMT -5
In the old days when I had my overclocked 965BE(4500MHz) with Samsung CL6 ram I would easily run latency's in the low 40s high 30s. Took me a while to tune in to that. That was a fast little setup. I can't even imagine that with these newer AMD setups.
|
|
|
Post by freeagent on May 18, 2021 14:39:34 GMT -5
Even if I were able to snag a set of those sticks that can do 2k 12-12-12 I wouldn’t be able to run them, those guys are pushing 2v+ But I think my board only goes to 1.8v.. unless you have to unlock ln2 mode to get the extra.. but I doubt it..
|
|
|
Post by georgekokovinis on May 18, 2021 15:15:28 GMT -5
Even if I were able to snag a set of those sticks that can do 2k 12-12-12 I wouldn’t be able to run them, those guys are pushing 2v+ But I think my board only goes to 1.8v.. unless you have to unlock ln2 mode to get the extra.. but I doubt it.. Well...since I am " one of those guys " - as a matter of fact I think I am the only one in this team that has the mems, boards and knowledgs to push mems so high and so tight, I would like to inform you that 1.8Vmem is more than enough to do 3866 / 12-11-11-28-1T, even on an average board woth average A1 sticks. It is not bad, not bad at all.
|
|
|
Post by freeagent on May 18, 2021 15:32:00 GMT -5
Awesome! My sticks might be able to do that, but I am too chicken to feed that much voltage! Lol.. Also my "one of those guys" comment wasn't directed at anyone in particular, I just mean "those guys" on hwbot Because I am not willing to invest in top end bot killing hardware, there is some knowledge that I will have to forfeit. In the meantime I am still learning everyday something new with my first set of DDR4
|
|
|
Post by georgekokovinis on May 18, 2021 15:35:11 GMT -5
Awesome! My sticks might be able to do that, but I am too chicken to feed that much voltage! Lol.. Also my "one of those guys" comment wasn't directed at anyone in particular, I just mean "those guys" on hwbot Because I am not willing to invest in top end bot killing hardware, there is some knowledge that I will have to forfeit. In the meantime I am still learning everyday something new with my first set of DDR4 I am available to help. Nothing to be afraid of at 1.8vmem.
|
|
|
Post by Mr.Scott on May 18, 2021 15:42:09 GMT -5
Even if I were able to snag a set of those sticks that can do 2k 12-12-12 I wouldn’t be able to run them, those guys are pushing 2v+ But I think my board only goes to 1.8v.. unless you have to unlock ln2 mode to get the extra.. but I doubt it.. Well...since I am " one of those guys " - as a matter of fact I think I am the only one in this team that has the mems, boards and knowledgs to push mems so high and so tight, I would like to inform you that 1.8Vmem is more than enough to do 3866 / 12-11-11-28-1T, even on an average board woth average A1 sticks. It is not bad, not bad at all. You are indeed 'one of those guys', if not THE guy.
|
|
|
Post by freeagent on May 18, 2021 15:54:13 GMT -5
Awesome! My sticks might be able to do that, but I am too chicken to feed that much voltage! Lol.. Also my "one of those guys" comment wasn't directed at anyone in particular, I just mean "those guys" on hwbot Because I am not willing to invest in top end bot killing hardware, there is some knowledge that I will have to forfeit. In the meantime I am still learning everyday something new with my first set of DDR4 I am available to help. Nothing to be afraid of at 1.8vmem. Thank you! I really appreciate it! 1.8v is ok? OK! I have to fire up the bbq soon and get dinner prepared, but once the kids are busy I will get to work! Might be better when we turn the air on, its about 78 in the house atm, in the basement maybe 73.. I preferred it when it was 60something.. so did my computer.. but they are pretty tough!
|
|
|
Post by georgekokovinis on May 18, 2021 16:07:47 GMT -5
Well...since I am " one of those guys " - as a matter of fact I think I am the only one in this team that has the mems, boards and knowledgs to push mems so high and so tight, I would like to inform you that 1.8Vmem is more than enough to do 3866 / 12-11-11-28-1T, even on an average board woth average A1 sticks. It is not bad, not bad at all. You are indeed 'one of those guys', if not THE guy. THANK YOU, but by no means I am not. I am trying hard. I think I have reached a pretty satisfactory level, there is lots of room for further improvement. Working on it BTW, I am currently improving on X58. I have some cpus( extreme ) on order. I am searching for a good set of dominators gtx2 ( 2000/6-6-6-20-1T ). Improvement must be on a multilevel basis.
|
|
|
Post by georgekokovinis on May 18, 2021 16:09:51 GMT -5
I am available to help. Nothing to be afraid of at 1.8vmem. Thank you! I really appreciate it! 1.8v is ok? OK! I have to fire up the bbq soon and get dinner prepared, but once the kids are busy I will get to work! Might be better when we turn the air on, its about 78 in the house atm, in the basement maybe 73.. I preferred it when it was 60something.. so did my computer.. but they are pretty tough! No, you will not. I will contact you tomorrow. Dont improvise please.
|
|
|
Post by ShrimpBrime on May 18, 2021 16:10:26 GMT -5
Shh. I won't tell if you don't tell. George has helped me in PM with high speed low latency memory tweaking. (I give no settings away unless he says OK.)
Having the right hardware is super important. That which I lack, I preserve the settings until a time when I do have the correct hardware.
That said, my best CL at 4000mhz is 14-14-14 1.6v - I tried 12-14-14 up to 2.0v. No go. 1.9 to 2.0v is your max, get air on them for sure!
The other thing that helps, which I had available was keeping that IMC cool as possible. I was running a 6.5c water Delta. The issue was more so having the correct memory and motherboard (Apex) so We came to a conclusion I had decent results, benchmarks do show it over Cas 16 for sure. Limit yourself to 1.9v in the warmer months I think is good advice.
Good Luck dudes!
|
|
|
Post by georgekokovinis on May 18, 2021 16:15:32 GMT -5
Shh. I won't tell if you don't tell. George has helped me in PM with high speed low latency memory tweaking. (I give no settings away unless he says OK.) Having the right hardware is super important. That which I lack, I preserve the settings until a time when I do have the correct hardware. That said, my best CL at 4000mhz is 14-14-14 1.6v - I tried 12-14-14 up to 2.0v. No go. 1.9 to 2.0v is your max, get air on them for sure! The other thing that helps, which I had available was keeping that IMC cool as possible. I was running a 6.5c water Delta. The issue was more so having the correct memory and motherboard (Apex) so We came to a conclusion I had decent results, benchmarks do show it over Cas 16 for sure. Limit yourself to 1.9v in the warmer months I think is good advice. Good Luck dudes! Speak up freely brother. I had only one reason for privacy. This reason does not exist anymore lol.
|
|
|
Post by ShrimpBrime on May 18, 2021 16:57:16 GMT -5
Shh. I won't tell if you don't tell. George has helped me in PM with high speed low latency memory tweaking. (I give no settings away unless he says OK.) Having the right hardware is super important. That which I lack, I preserve the settings until a time when I do have the correct hardware. That said, my best CL at 4000mhz is 14-14-14 1.6v - I tried 12-14-14 up to 2.0v. No go. 1.9 to 2.0v is your max, get air on them for sure! The other thing that helps, which I had available was keeping that IMC cool as possible. I was running a 6.5c water Delta. The issue was more so having the correct memory and motherboard (Apex) so We came to a conclusion I had decent results, benchmarks do show it over Cas 16 for sure. Limit yourself to 1.9v in the warmer months I think is good advice. Good Luck dudes! Speak up freely brother. I had only one reason for privacy. This reason does not exist anymore lol. This section of the forum is public. It would be merely a copy paste of settings. Maybe later when I'm at the desk..
|
|
|
Post by freeagent on May 18, 2021 17:13:22 GMT -5
At your leisure of course.. there is no rush. I am not free during the day like I have been lately.. I do appreciate the offer, and look forward to working with you.
|
|
|
Post by ShrimpBrime on May 18, 2021 19:47:54 GMT -5
At your leisure of course.. there is no rush. I am not free during the day like I have been lately.. I do appreciate the offer, and look forward to working with you. Check the team section. Made a thread. Thank you georgekokovinis
|
|
|
Post by Vinster on May 20, 2021 10:03:53 GMT -5
I can echo 2000mhz at CL14 @under 1.8v with the help of George. Just make sure your case has generic air flow
Vin
|
|
|
Post by freeagent on May 20, 2021 14:37:31 GMT -5
I can echo 2000mhz at CL14 @under 1.8v with the help of George. Just make sure your case has generic air flow Vin I have a little I also lost my desk.
|
|