|
Post by Mr.Scott on Jan 4, 2019 20:22:37 GMT -5
Which openCL?
|
|
|
Post by georgekokovinis on Jan 4, 2019 20:27:45 GMT -5
OpenCl 2.1 is the latest and fastest driver for Intel.
for AMD I do not know.
|
|
|
Post by ozz on Jan 4, 2019 20:33:29 GMT -5
pete told me never use the amd, always intel cl driver
|
|
|
Post by Mr.Scott on Jan 4, 2019 21:22:50 GMT -5
Where do I get it? I only have 1.2 for Intel and it doesn't work.....at least on X58 and W7x64.
|
|
|
Post by ozz on Jan 4, 2019 21:53:38 GMT -5
Where do I get it? I only have 1.2 for Intel and it doesn't work.....at least on X58 and W7x64. well no wonder, too early id reckon, pete will have all you want , there isnt much he hasnt got , ive got it but dunno if the right one for the x58, he will tho
|
|
|
Post by Macsbeach98 on Jan 4, 2019 22:46:19 GMT -5
Intel OpenCL works with intel I am about to run GPUPI on the 565be 3 core cold AMD OpenCL didnt work and I installed Intel openCL over the top of it and it worked but GPUPI says its using AMD 1.2 go figure. Here is the intel OpenCL I have got Scotty. 1drv.ms/u/s!AtggOM_n_C-IuyAXBTOHvTS6ffEf
|
|
|
Post by georgekokovinis on Jan 5, 2019 0:35:28 GMT -5
Where do I get it? I only have 1.2 for Intel and it doesn't work.....at least on X58 and W7x64. Give me a cloud of yours Scotty to upload directly the executable It is opencl_runtime_18.1_x64_setup.msi and it is 61mb in size. Give me temporary ( 24 hours ) permission in your cloud space and I will upload it.
N.B. You MUST unistall any previous opencl or Intel SDK applications and reboot before installing new driver.
|
|
|
Post by Mr.Scott on Jan 5, 2019 9:27:40 GMT -5
Got it going. Running openCL 2.1 now. Thanks for all the help. Wound up being my trimmed W7 OS was a little too lean. Needed a couple things turned back on. Now to get stable enough to finish a run.
|
|
|
Post by WhiteWulfe on Jan 5, 2019 14:56:38 GMT -5
What kind of benefits does OpenCL 2.1 bring to the table? Right now I'm running the AMD something something 2.0 SDK which is... showing up as OpenCL 1.2?
|
|
|
Post by Aleslammer on Jan 6, 2019 9:14:16 GMT -5
Just to clarify three of the benches used are multi core / thread aware use um if you got them.
Based on information from Newegg AMD Threadripper 2990WX, 32 core / 64 thread any EPYC with the same or less core / thread count is allowed. Intel Core i9-9980XE, 18 core / 36 threads any Xeon with same or less core / thread count is allowed Just trying to cancel out something like a 96 core / 192 thread concept if someone had it available to use.
Fastest WP 32 is a i9 7960X 16 core 1.123s Best WP 32 AMD 2990WX, 1.638s, 2990WX owns the WP 1024 record! (2/2/19, Well did.)
Just for a little more information on the low idea the fastest WP 32 from above is 0.515s faster than the AMD but the score / number is also 0.515 lower than the AMD.
As to the choice of benches they all fit into the low concept and was the only considerations for use. GPUPI 3.3 100M & y-cruncher Pi-25m personally have only ran a few times, 3.3 ran with out problem on a S478 system during TC, (loaded by mistake) and y-cruncher had no problems with W7 64 although have yet to get the 10b to run.
Sorry for the redundancy.
|
|
|
Post by ShrimpBrime on Jan 6, 2019 14:25:39 GMT -5
Thank You. So which option should I run. I don't have a 25m selection in the second box there. So #1 selection on the first box I assume? Should bench look like this? ShrimpBrime/2700X@ 4.1Ghz/Corsair 1333Mhz/Asus B450M-A/Stock Air/1.159 seconds
|
|
|
Post by Macsbeach98 on Jan 6, 2019 16:09:48 GMT -5
Yep that is right. 25000000 in the first box Option 1.
|
|
|
Post by Aleslammer on Jan 24, 2019 21:39:42 GMT -5
Prize image Notes Maximus II Formula Do not have the LCD poster and sound card not tested OCZ Flex XLC DDR2 1150 removed OCZ Flex XLC DDR2 1200 replacement, Kit #8 DDR2 Binning Phase 1 Please note, other than the MB (1 sub see link below) and the replacement OCZ Flex all other components have not been tested other than functionality and were bought off Ebay for this competition. hwbot.org/submission/3894434_aleslammer_wprime___32m_core_2_duo_e8600_15sec_421ms
|
|
|
Post by WhiteWulfe on Jan 25, 2019 1:12:14 GMT -5
Ooooooooooooh... Hello my old friend... My first board that I killed... ^_^;;;;
|
|
|
Post by Macsbeach98 on Jan 25, 2019 1:50:08 GMT -5
Looks Nice Brad
|
|
|
Post by Mr.Scott on Jan 25, 2019 7:55:18 GMT -5
Indeed
|
|
|
Post by Aleslammer on Jan 29, 2019 9:58:42 GMT -5
Just realize I also used the Maximus to backup some comments I made on a post over at OCN, Image used is posted here at Post 1, Page 2 of the DDR2 Binning thread.
|
|
|
Post by Aleslammer on Jan 31, 2019 17:10:56 GMT -5
|
|
|
Post by Mr.Scott on Feb 1, 2019 18:41:56 GMT -5
I has threads. 24 should be ok.
|
|
|
Post by Aleslammer on Feb 1, 2019 19:02:31 GMT -5
12/24 Max is OK, dual socket a problem.
Forgot about this period in time when setting up the comp, will leave it to those playing.
|
|
|
Post by Mr.Scott on Feb 1, 2019 19:05:18 GMT -5
My bad. Didn't see single socket in the rules till now. I will head a different direction.
|
|
|
Post by Macsbeach98 on Feb 1, 2019 19:08:55 GMT -5
I has threads. 24 should be ok. Jesus 1366 has gone to your head. Nice board. Brad I dont have a problem with Scott using it.
|
|
|
Post by Mr.Scott on Feb 1, 2019 19:11:10 GMT -5
I like the platform. Tweaking these is very close to the same as old AMD. I feel very comfortable here.
|
|
|
Post by Aleslammer on Feb 1, 2019 19:11:31 GMT -5
No problem on my side, would like to see it action. 1366 does hold it's own though against some of the newer offerings.
|
|
|
Post by Mr.Scott on Feb 1, 2019 19:13:35 GMT -5
Indeed. For a 10 year old platform, it was very much ahead of it's time.
|
|
|
Post by Aleslammer on Feb 2, 2019 8:43:15 GMT -5
Changes have been made to the General Rules highlighted in blue.
Allowances will be made for anyone having already created screen shots that don't fit the changes. Give me a PM if you wanted to hold on to it for awhile before posting. (No result necessary just intent)
|
|
|
Post by Mr.Scott on Feb 2, 2019 10:05:58 GMT -5
Nice. You didn't have to do that. I can use something else.
|
|
|
Post by Aleslammer on Feb 2, 2019 10:25:39 GMT -5
I'm good. does open the door for the 1680 V2 (16/32) in dual socket. Just not sure how to deal with more than 2 available sockets.
|
|
|
Post by dr4g00n on Feb 2, 2019 10:37:27 GMT -5
I'll get some subs done for this one. Need to go load up barbonet on the mocf first though and see if it wants to run 4200 12-11 mems for me.
|
|
|
Post by Aleslammer on Feb 3, 2019 10:13:28 GMT -5
Macsbeach98's submissions are a perfect example of all five benches concerning the minimum requirements stated in the General Rules for screen shots.
Just in case someone asks order for less than all five based on posting date.
|
|