|
Post by Vinster on May 21, 2019 11:15:07 GMT -5
Tax return is in, I have ordered a new rad and some glycol concentrate. rad is 2 x 140mm x 45mm thick. I expect it in a week. I'm looking forward to putting my rig back together again.
Vin
|
|
|
Post by ShrimpBrime on May 21, 2019 17:02:46 GMT -5
|
|
|
Post by Vinster on May 25, 2019 12:17:23 GMT -5
System is going down for a few days for the rebuild. going to put my rig back together. no more benching stand for her, she's been on there long enough.
Vin
|
|
|
Post by Aleslammer on May 25, 2019 12:47:32 GMT -5
I'm down around the the 6 AM update tomorrow, going to see if I can get Linux going.
|
|
|
Post by Vinster on May 26, 2019 20:33:58 GMT -5
Stress testing the rig with F@H.
on air with a Cooler Master Hyper 212 Evo, I couldn't at all stress test this CPU... it would just to 70 degrees with only 2 cores on F@H, I couldn't let it run....
on water, with a 4x 140mm fans in a push-pull and the RAD being 45mm thick running F@H for about an hours I've settled at 53 degrees CPU temp and an estimated count of 60K ppd. Not too shabby....
I've also updated the Bios and decided to run a few of the pre-loaded Bios configurations for the HW that I am running (Tweaked the CPU Vcore down, was running at 1.545v... so I've manually cranked it down to 1.350v in bios...and so far, I'm happy
Screen Porn...
Vin
|
|