|
Post by Bones on May 26, 2022 16:30:31 GMT -5
I don’t know how I didn’t find this area sooner :-( I would have asked a nicer Question here instead of here ( warp9-systems.proboards.com/thread/928/intel-1366-x58?page=3) So from reading this area - It’s my i7-920 that is holding back my R3E and E760 MB. I’ll just start grabbing some off E-B as they are $10-$12 ea. You did find it and that's what counts.
|
|
|
Post by maddmutt on May 31, 2022 9:21:42 GMT -5
Here are my settings for the e760 with the i7-950 & i7-960 * Memory set to 2:6 divider = 1375 (950) & 1412 (960) ** -> Voltage Control <- ** - VDroop = Enabled __ Both CPUs - Cpu Vcore = 1.5v __ Both CPUs - CPU VTT = +400mv __ Both CPUs - QPI PLL Vcore = 1.500v (950) & 1.450v (960) - Dimm Voltage = 1.650v - IOH Vcore = 1.500v __ Both CPUs - IOH/ICH I/O Voltage = 1.750v __ Both CPUs - ICH Vcore = 1.425v (950) & 1.325v (960) - VTT PWM Frequency = 250KHz __ Both CPUs - CPU PWM Frequency = 800KHz __ Both CPUs - CPU Impedance = Less __ Both CPUs - QPI Signal = Less __ Both CPUs
** -> Basic Overclocking of the i7-950 & i7-960 <- ** -- CPU Clock Ratio = 13 (950) 14 (960) -- CPU Host Frequency (BLCK) = 230 (950) 235 (960) -- MCH Strap = 1333 __ Both CPUs -- CPU UnCore Frequency = x17 __ 3915 (950) __ 4000 (960) -- Clock Skew = 0 __ Both CPUs -- IOH Skew = 0 __ Both CPUs -- Spread Spectrum = Disabled __ Both CPUs -- PCIe Frequency = 106 __ Both CPUs -- OC Recovery = Enabled -- Turbo Performance = Disabled
|
|