|
Post by Vinster on Mar 28, 2018 7:08:16 GMT -5
Card sounds good. What CPU are going to push it with? I'm limited to an X58 chipset. I have some untested Xeon's and a beaten i7-920. Only quads I have. Too bad we couldn't just turn off cores (I get why thought) then I'd have my Ryzen 1700x or my i7-980x... I have a big gap between these chipset generations with nothing to fill it right now. I have 2000mhz (3 different sets) and one set of 2400mhz DDR3 ram, the 2D GPU benches are what I'll be focusing on, with this chipset I don't believe I have much chance in CPU/3DGPU benching. This weekend I'll clean off the destined Benching area (cluttered right now) and lay this stuff out and prep the area. I've ordered some thermal pads/tape and small heatsinks for vmem. I'll setup a Corsair H100 for ambient. Vin
|
|
|
Post by Macsbeach98 on Mar 28, 2018 8:01:10 GMT -5
GPUPI on the GPU is all card CPU doesnt make much difference at all. 3D03 is GPU based a fast CPU makes a difference a 1366 Xeon that goes to 5Ghz or close is probably your best bet. X265 is done on the CPU the same as Geekbench4 both are 2D benches
A quote from David in the competition thread on OCN post 15 "Correct, there are no GPU requirements for the 2D stages. Feel free to use any arrangement of graphics cards that you want to"
I will probably be using my trusty GT710 for the 2D stages
Pity you couldnt buy a cheap Ryzen 1300 Quad. Even if you dont win get subs in for it there are 14 raffle prizes on offer and it will be good fun. Any Vmod questions just ask.
|
|
|
Post by Aleslammer on Mar 28, 2018 9:09:59 GMT -5
Wow, nice comp going to have to do some prepping middle to the end of next month for me.
|
|
|
Post by Vinster on Mar 28, 2018 9:15:19 GMT -5
GPUPI on the GPU is all card CPU doesnt make much difference at all. 3D03 is GPU based a fast CPU makes a difference a 1366 Xeon that goes to 5Ghz or close is probably your best bet. X265 is done on the CPU the same as Geekbench4 both are 2D benches A quote from David in the competition thread on OCN post 15 "Correct, there are no GPU requirements for the 2D stages. Feel free to use any arrangement of graphics cards that you want to" I will probably be using my trusty GT710 for the 2D stages Pity you couldnt buy a cheap Ryzen 1300 Quad. Even if you dont win get subs in for it there are 14 raffle prizes on offer and it will be good fun. Any Vmod questions just ask. I have GT210's for the CPU based benches I can use. I doubt my Xeon's will get close to 5ghz without cold, I've never had that luck. for the Ryzen, I wouldn't want to breakdown my 24/7 rig, she's water cooled and such... for the vmod's, I will Vin
|
|
|
Post by dr4g00n on Mar 28, 2018 10:35:52 GMT -5
I have GT210's for the CPU based benches I can use. I doubt my Xeon's will get close to 5ghz without cold, I've never had that luck. for the Ryzen, I wouldn't want to breakdown my 24/7 rig, she's water cooled and such... for the vmod's, I will Vin Which board are you going to use? I have an X5687 here that did 5.2GHz @ 1.66V on air w/ 2c/2t using my X58A-OC. You can have it for cheap if you want it since I never use the thing anymore. IIRC it did 5.7 - 5.8GHz 2c/2t & 5.4 - 5.5GHz 4c/8t @ 1.8V on dice. Valid at 6GHz 1.86V 1c/1t.
|
|
|
Post by Vinster on Mar 28, 2018 13:17:21 GMT -5
I have a few boards, either a Gigabyte X58A-UD3R v2.0 or an EVGA e770 Classified 3. Out of the two that CPU would only run on my EVGA.
I have a handful of untested CPU's I'll see what they do first, I also don't even know what CPU's I have anymore. been a while.
Vin
|
|
|
Post by Mr.Scott on Mar 28, 2018 16:22:41 GMT -5
Which board are you going to use? I have an X5687 here that did 5.2GHz @ 1.66V on air w/ 2c/2t using my X58A-OC. You can have it for cheap if you want it since I never use the thing anymore. IIRC it did 5.7 - 5.8GHz 2c/2t & 5.4 - 5.5GHz 4c/8t @ 1.8V on dice. Valid at 6GHz 1.86V 1c/1t. Very generous offer.
|
|
|
Post by Vinster on Mar 29, 2018 22:07:10 GMT -5
I have a line on a BFG GTX260 MaxCore from ebay, $20. Guy is local so I'm trying to arrange for pickup to bypass the $20 shipping... then I'll mod the hell out of it Vin This ended up falling through seller was to end the auction but didn't before it got snagged. quest continues Vin
|
|
|
Post by mllrkllr88 on Mar 30, 2018 14:27:59 GMT -5
How are thing going with you guys? Remember, all you need to do to enter the raffle is make 1 legal sub. Your time may be slow but I think Geek4 Single would work with any platform...guessing 775 and 939 would do the trick. Side note: It would be seriously awesome to see some 939 action! Bones Did you get it working? Try reducing your size to 1M/16 to see if that makes it pass.
|
|
|
Post by Mr.Scott on Mar 30, 2018 15:18:41 GMT -5
Oh I'll be in for sure in ambient. Just waiting for opening day.
|
|
|
Post by Bones on Mar 30, 2018 15:35:47 GMT -5
Not yet and ATM I can't get to it. Had a non-PC related issue come up that may well spell me not getting in, hopefully not but having to concentrate on this first.
|
|
|
Post by Macsbeach98 on Mar 30, 2018 16:02:38 GMT -5
I will be setting up today to test this card I have got I will throw subs into ambient for now while testing and modding.
|
|
|
Post by Vinster on Mar 30, 2018 17:17:38 GMT -5
I started setting up my benching area for ambient, started building a new bench table as well. I'll get at least Geek4 I believe, I've ordered a GTX260 and some bits, but the delivery of parts is close to the end of the comp. we'll see how it goes.
Vin
|
|
|
Post by mllrkllr88 on Mar 30, 2018 20:02:29 GMT -5
You guys will probably beat me to the subs I have been testing for months, im going to take a nice break from 260 and do other things once the comp starts. Hey, just a side note... I have been working with Mat, the creator of GPUPI, and they are going to release a new version a few days after the comp starts. Its a bit unfortunate but there is just nothing I can do about it. Subs made with both versions will be accepted.
|
|
|
Post by ozz on Mar 30, 2018 21:57:14 GMT -5
im waiting on hardware too, both versions are accepted so , i guess the go is to try both, see what suits better for what ever platform used
|
|
|
Post by Macsbeach98 on Mar 31, 2018 0:57:22 GMT -5
The new version will be the go when it gets here HWinfo will work on it. Here is my card a MSI I will put vmods up for it later. Controller is a ADP4100
|
|
|
Post by ozz on Mar 31, 2018 1:24:22 GMT -5
im watching the same card, i told ya, im buying 3 ,
|
|
|
Post by Mr.Scott on Mar 31, 2018 7:14:40 GMT -5
My 260 is a slug. Looks brand new, core clocks like shit. Vmod for sure. Mem is good, temps are real good.
|
|
|
Post by Macsbeach98 on Mar 31, 2018 9:17:31 GMT -5
mine is only doing 730 core @ 1.14v mem 1250 I will solder a couple of trimmers on in the morning and see how it goes.
|
|
|
Post by Mr.Scott on Mar 31, 2018 13:05:57 GMT -5
Lol, that's funny. Same as mine is running.
|
|
|
Post by Macsbeach98 on Mar 31, 2018 17:01:19 GMT -5
Not a MSI is it
|
|
|
Post by Mr.Scott on Mar 31, 2018 17:29:34 GMT -5
No. EVGA
|
|
|
Post by Macsbeach98 on Mar 31, 2018 17:31:19 GMT -5
Ah Ok is that the same as the one David showed that he had modded? Around the 730mhz is the average core speed for them I think.
|
|
|
Post by Mr.Scott on Mar 31, 2018 17:44:57 GMT -5
Looks wise yes, but his is a different PCB. Mine is like this.
|
|
|
Post by Macsbeach98 on Mar 31, 2018 17:52:51 GMT -5
Its got the same ADP4100 as mine looks the same card mine is just red. Will have vmods up soon.
|
|
|
Post by Bones on Mar 31, 2018 20:02:34 GMT -5
Looks wise yes, but his is a different PCB. Mine is like this. I believe that's identical to mine, it's also an EVGA card. Mine is the exact model Miller modded for reference.
|
|
|
Post by Macsbeach98 on Mar 31, 2018 20:17:50 GMT -5
Davids card has got a NCP3588 controller mine and Scotties have got a ADP4100 controller on them. Scottie I am going to put the voltmods up now in the voltmod section but beware you will need good active cooling on the mosfets mine melted the solder under them and blew out @ 1.28v halfway through 3D03 at 790mhz. I should of knew better they were getting pretty hot just running standard without the standard cooler on them. Ah well not to worry it is going to have major surgery now.
|
|
|
Post by mllrkllr88 on Mar 31, 2018 20:26:56 GMT -5
Check post #2 for mods Its live, wallpaper is up! GO GO
|
|
|
Post by Macsbeach98 on Apr 1, 2018 1:16:16 GMT -5
Cant let a dead VRM stop me. its better now Scotty 815mhz 1.27v
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Apr 1, 2018 3:39:35 GMT -5
Haha madman So it's best not to loan you guys stuff
|
|