|
Post by ozz on Feb 28, 2018 18:02:08 GMT -5
|
|
|
Post by ozz on Feb 28, 2018 18:47:43 GMT -5
|
|
|
Post by Bones on Feb 28, 2018 19:12:01 GMT -5
I can say since I do have a few sets like these the date is also important.
One of my sets is of a later date (2012) and does not clock as well as the other two sets I have (2011), probrably due to the better clocking chips being used up so they used chips that would run to these specs at stock but not as good for overall OC'ing. I have one set of PI's (2011) and two sets of Ripjaws (2011 and 2012), all with the same specs (CL6 8-6-24) and the older ones consistently do better then the newer set does.
|
|
|
Post by ozz on Feb 28, 2018 19:24:04 GMT -5
not much of a pic so ill try again, top stick is the trident,
|
|
|
Post by ozz on Feb 28, 2018 19:39:34 GMT -5
i been lookin for yrs now for a set of 3000mhz ddr3, ill find a set 1 day, theyll come up somewhere
|
|
|
Post by Aleslammer on Mar 1, 2018 10:31:07 GMT -5
As I stated earlier spent a bunch of time on H265 4K tying to get by 4.42, failed.
4.39 FPS, same score all settings below
5405 / 9-11-10-30 2T (2X4 Klevv Urbane) 5430 / “ 5449 / “ 5470 / “
4.42 FPS, score I was trying to catch
5251 / 8/10/10/29 2T (2X4 Look like Tridents)
4.41 FPS, my best
5381 / 8/10/10/27 1T (2X4 Corsair Doms)
Figured core speed would make a difference but not seeing any scaling, tighter RAM helped, guess my OS sucks?
Thanks for the information, the 2X4 Tirdent X kit I have is Samsung (1500). All the G Skills I have with a 1040 marking are 2 gig sticks.
|
|
|
Post by alpi on Mar 3, 2018 12:33:52 GMT -5
Here is mine Bbse ! Mushkin Redline's, it was a trikit (3x2) but one died. It was happened at the previous owner, I bought them as a duo.
|
|
|
Post by Aleslammer on Mar 3, 2018 16:41:57 GMT -5
Nice kit, but your running SP and I right out suck at SP32 (especially Intel) for the love of money I can't get the tweaks to work with with the XP OS I use.
|
|
|
Post by Macsbeach98 on Mar 3, 2018 17:19:58 GMT -5
What are your TridentX Brad 2400 or 2666? I have given up on Div 7 now the 2600k I have got is a potato 5Gig on water 5.1 if you are lucky and 5.4 at -100 cant compete with these 5.9 gig subs. I was going to epower the 480 too for those 2 subs but not now. I am sticking with Div IV and Div VI
|
|
|
Post by Aleslammer on Mar 3, 2018 17:33:50 GMT -5
The TridentX are 2400s. I played in Div 7 but only for the base points have no intention of trying harder. 2600 I have is pretty weak also.
|
|
|
Post by Bones on Mar 3, 2018 19:48:32 GMT -5
More or less the same with mine, will do 5.2+ on water, even though it can reach 5.3 it's a chore just to get it there. I've never frozen the chip before and that may or may not make a difference but I already know SB doesn't scale with cold so..... Like you guys I've got what I've got.
|
|
|
Post by alpi on Mar 4, 2018 2:04:56 GMT -5
Div VII is done for me too. I haven't got any 1155 stuffs, but have some really kind friend and they lended me. Even the 450Gts isn't mine. The first 2600K was really a beauty chip for 24/7. Very low voltages and insane linear scaling. (till the wall...) Now with this second one I made only spi32 runs. Tryed some settings, ram kits, and having fun mostly.
|
|
|
Post by alpi on Mar 4, 2018 2:14:26 GMT -5
Wow ! Sick factory spec ! Maybe this is one of the best types to reach 2600+. It has to be pretty highly binned because the very high speed. ( I think ) Pi's is the most common type of psc which can be seen in the top submissions, it can not be a coincidence !
|
|
|
Post by ozz on Mar 4, 2018 3:05:56 GMT -5
|
|
|
Post by ksateaaa23 on Feb 2, 2019 15:04:01 GMT -5
i have two very good ddr3 kits, trident x 1200(1333), klevv genuine 1466(1600-1650). they do well clocking higher but struggle with tight timings/lower clocks. do well with hashwell though. looking for ddr3 kits which can do 1000-1150 timing like 7-10-7-24-1, 8-10-8-24-1 or even 8-12-8-24-1 etc....... g.skill pi seems to be very good but very expensive on ebay. looking for a decent kit cost around 40-50 usd.... got what i have looked for (TRANSCEND AXE RAM). exactly same timings & same price(38 usd). 1100 7-10-7-24-1t or 1000 6-9-6-1t tried so far. beyond 1115-20 needs cl8. i have used voltage upto 1.69v. whether increasing the voltage can it do, 1155-1160 7-10-7-24-1t, can i do anything better in terms of clocks or timings on sandy bridge. (on haswell, there are subs available on bot around 1250-1300 8-12-8-28-1t)
|
|
|
Post by alpi on Feb 3, 2019 18:02:02 GMT -5
What are the secondary timings ? If these are pscs, it can be happen that You need to raise tRas for 1000+ Usually not, but it worth a try. Also a badly choosen wCl can cause a "dead zone" with Cl.
|
|
|
Post by bullant on Feb 8, 2019 2:07:28 GMT -5
Normally I can run 1.87-1.91v on air PSC sandy-Ivy and Haswell ksateaaa23....on ln2 memory they run higher volts but sandy is the lowest, then it increases on ivy and more so Haswell. You want to try run twcl6 or twcl7, running twcl8 will loose eff. On sandy you should be able to tighten Trfc 68-72 and ivy, haswell run Trfc 88-96 if your aiming 2600mhz.....subtimings will help on all platforms
if you increase your memory dram volts in small increments like 1.65-1.68-1-7-1.73 and so on, then test 32m each time, your memory will tell you when it to much...
|
|
|
Post by ksateaaa23 on Feb 9, 2019 12:33:36 GMT -5
was trying to reproduce 0.6 score with g470 x265 4k couple of days. needed tight timings. 1002.3 @6-9-6-24-1t & trfc 74 (auto-111) tras 21 was crashing during the bench. also tried to do cl7 1146 but needs 7-10-10-24-1t which was not doing well in this particular bench. to boot cl7 needed voltage of 1.82v. 1115-20 can do 7-11-7-24-1t. learning.................
|
|
|
Post by Macsbeach98 on Feb 9, 2019 17:06:22 GMT -5
Tell me K do you go away and make a cup of coffee or have lunch while its running.
|
|
|
Post by Aleslammer on Feb 10, 2019 9:38:52 GMT -5
Tell me K do you go away and make a cup of coffee or have lunch while its running. And a little snuggling with the better half.
|
|
|
Post by Aleslammer on Feb 12, 2019 18:47:53 GMT -5
K, was playing with the DDR3 Axeram kit yesterday, platform used probably not the best for a comparison but it was what I had on the bench. Vcore 1.72v BIOS (8c fluid), NB 1.55v, RAM 1.75v, 12x400 on the CPU and 1:2 strap memory, tested both for tightest timings I could make Windows. Then tested using SP1 and SetFSB to see how far I could get. Performance Level was 6 for both but was set in Windows with Memset both came up7 on auto (hate the offset method Asus uses). Xeon used is a Presler and compared against my favorite set of DDR3, do want to give them a go in something newer. AxeRam Patriot
|
|
|
Post by alpi on Feb 12, 2019 18:53:09 GMT -5
Wow ! Never seen any P35 doing Cr1 ! Pretty strong ram performance.
|
|
|
Post by Aleslammer on Feb 12, 2019 19:24:27 GMT -5
Always thought it was a DDR2 problem but have had problems with some of the P5Q DDR3 variants, only P35 DDR3 board I've ever used.
|
|
|
Post by ground on Feb 28, 2019 17:41:11 GMT -5
I'm a bit of a fan of OEM Elpida stuff, for a low-ish budget a kit of BDSE can be nice as a holdover. I currently don't have a CPU around capable of >1130, but these should scale to ~1250ish and are super cheap on ebay. Ignore the efficiency, OS is absolute garbage, just testing how tight the ram goes: CL7: abload.de/img/bdsec723pkic.pngCL6: abload.de/img/bdsefrjm9.pngNote that this is a kit put together from 2 different kits and a matched kit should easily handle ~1020 6-11-6 at 1.85V-ish. EBJ21UE8BDF0 is what you'll be looking for on ebay. If you manage finding EBJ21UE8BBF0 it would be even better (thats OEM BBSE, I've had a kit capable of 1000 5-9-6 at 1.86V, though the second kit I found barely managed 1000 6-9-6) High bin BBSE is absolutely crazy even at low MHz, but really hard to find. My 2200 C9 RipjawsX kit does this at 1.84V: abload.de/img/qtemctfe5k5h.jpg
|
|