|
Post by Shadyreaper on Jun 4, 2017 9:27:34 GMT -5
Yes, the chip seems pretty good on air, I think it'll go lower on the vcore too @ 3GHz. It came with an Arctic Freezer 64 pro so temps hit 48c on core #2 with those settings. These cpu's are pasted not soldered right? I think they are pasted here is one delidded already that I found a pic of
|
|
|
Post by Shadyreaper on Jun 4, 2017 9:30:00 GMT -5
|
|
|
Post by Mr.Scott on Jun 4, 2017 9:30:08 GMT -5
Not soldered, correct. A lot of mine have seen better than 1.7v for over 3 gig. De-lidding doesn't always help. Most of the time it'll only help balance the core temps so you don't have a hot one. Little increase in overclocking usually.
|
|
|
Post by Shadyreaper on Jun 4, 2017 9:32:59 GMT -5
oh Im sure they take lots of voltage like that I was just pointing out his is really nice to hit those speeds with that low of voltage is super sweet
|
|
|
Post by Mr.Scott on Jun 4, 2017 9:34:48 GMT -5
oh Im sure they take lots of voltage like that I was just pointing out his is really nice to hit those speeds with that low of voltage is super sweet I'm agreeing with you.
|
|
|
Post by Shadyreaper on Jun 4, 2017 9:40:44 GMT -5
oh Im sure they take lots of voltage like that I was just pointing out his is really nice to hit those speeds with that low of voltage is super sweet I'm agreeing with you. oh LMAO sorry Im a little slow this morning
|
|
|
Post by Mr.Scott on Jun 4, 2017 9:42:09 GMT -5
Lol. All good my man.
|
|
|
Post by Shadyreaper on Jun 4, 2017 9:44:22 GMT -5
oh how is your hardware testing going
|
|
|
Post by Mr.Scott on Jun 4, 2017 9:46:11 GMT -5
Haven't had a board that didn't boot yet.
|
|
|
Post by Shadyreaper on Jun 4, 2017 9:49:36 GMT -5
nice man that is cool as hell oh man I almost forgot I just found out Steponz (Joe) lives in FL right in tampa lol dude seems really cool too
|
|
|
Post by Bones on Jun 4, 2017 9:57:05 GMT -5
I thought he was up Mr. Scott's way - Just shows what I didn't know.
I believe I'll give this a shot with my Asus since it tends to work well with the Hercules so.... Won't be long before I'll take a shot at it.
|
|
|
Post by Shadyreaper on Jun 4, 2017 10:03:02 GMT -5
I thought he was up Mr. Scott's way - Just shows what I didn't know. I believe I'll give this a shot with my Asus since it tends to work well with the Hercules so.... Won't be long before I'll take a shot at it. yea I didnt know until I seen a post on facebook with him and Vince (Kingpin) and I noticed it said he was from Tampa FL he was telling me he cant wait to get back from Taipei he said its been raining there the whole time I told him its been raining here too LOL
|
|
|
Post by Shadyreaper on Jun 4, 2017 10:06:55 GMT -5
here I found the pic he tagged Vince in its of his homemade GPU pot LOL I noticed in this pic he also has a new gen 3 epower hooked to the card LOL
|
|
|
Post by Mr.Scott on Jun 4, 2017 10:10:38 GMT -5
Of course he has one. He is a world OC championship finalist. You can't get there without the goodies or contacts.
|
|
|
Post by Shadyreaper on Jun 4, 2017 10:17:50 GMT -5
Of course he has one. He is a world OC championship finalist. You can't get there without the goodies or contacts. oh yea I know its just cool as hell he uses homemade GPU pots LOL them guys had serious shit going on with the new X299 this last week rsannino won the gskill comp this year at computex I was hoping to go to the OCWC in seattle this year at PAX west but I dont think I am gonna be able to make it it isnt for another 3 months but getting the money to go prob aint gonna happen with everything going on
|
|
|
Post by dr4g00n on Jun 4, 2017 12:10:56 GMT -5
Took the lid off, lapped the heatsink and used the special sauce (IC diamond) with bare die. Now doing 3.1GHz @ 1.45V (real vcore) Dang this chip is good.
|
|
|
Post by Shadyreaper on Jun 4, 2017 12:15:32 GMT -5
Took the lid off, lapped the heatsink and used the special sauce (IC diamond) with bare die. Now doing 3.1GHz @ 1.45V (real vcore) Dang this chip is good. heck yea that is really good I bet that sucker would go pretty damn good on water or dry ice
|
|
|
Post by Mr.Scott on Jun 4, 2017 12:17:47 GMT -5
Most 939's cold bug.
|
|
|
Post by dr4g00n on Jun 4, 2017 12:21:38 GMT -5
What kind of temps does that generally happen at?
|
|
|
Post by Mr.Scott on Jun 4, 2017 12:31:37 GMT -5
Pending the chip, anyplace from 0c to -50c. Most are around the -30c range. Chiller gets close and every once and a while I hit it. SS or better will hit it every time. Need to monitor the temp good and stay above the bug temp when you find it.
|
|
|
Post by alpi on Jun 4, 2017 12:52:00 GMT -5
Alpi / Opteron 154 @ 3GHz / Ultra Extreme CH-6 @ 250MHz / 24.07.218s
|
|
|
Post by alpi on Jun 4, 2017 12:54:26 GMT -5
What kind of temps does that generally happen at? My Opteron 165 has cb around +15 degrees (yes, plus ! ) on very high bclk !
|
|
|
Post by Shadyreaper on Jun 4, 2017 12:56:59 GMT -5
oh yea I forgot about the CB with 939 I guess cause I havent any to bench LOL
|
|
|
Post by dr4g00n on Jun 4, 2017 13:05:01 GMT -5
A little better, need to bin my other 4 sticks of TCCD to see what they can do. DR4G00N / Opteron 180 @ 3.1GHz / Corsair XMS TCCD @ 259MHz / 24m 09.641s
|
|
|
Post by ShrimpBrime on Jun 4, 2017 15:37:00 GMT -5
Gets Rig in working condition in the time it takes wife to go grocery shopping XDWill update OP soon Dr4g00n
|
|
|
Post by alpi on Jun 4, 2017 15:46:17 GMT -5
2 rounds passed on 3.2Vdim. 500 cl2 passed also with 3.3V. Better than I think. Unfortunatelly they not scaling to higher voltage. So 500 mhz is nearly the top freq on cl2. 520 doable I think but i have to loosen tRas to 6. 2-3-2-6 and also have to loose some subs too so it's not a real gain.
|
|
|
Post by ozz on Jun 4, 2017 22:47:08 GMT -5
Not soldered, correct. A lot of mine have seen better than 1.7v for over 3 gig. De-lidding doesn't always help. Most of the time it'll only help balance the core temps so you don't have a hot one. Little increase in overclocking usually. correct scotty, ive found some even go worse when delidded
|
|
|
Post by alpi on Jun 5, 2017 1:28:17 GMT -5
That ddr1 freq !
|
|
|
Post by Macsbeach98 on Jun 5, 2017 2:03:30 GMT -5
Here is a quick run in between other things. Macsbeach98 - FX60 - 3150Mhz - CMX512-3500C2 - SPi 23.20.391
|
|
|
Post by Bones on Jun 5, 2017 19:05:01 GMT -5
Good stuff happening here guys! I'll give it a shot a little later and you can guess which chip and board I'll be using.
|
|