|
Post by Shadyreaper on Jan 7, 2017 11:34:59 GMT -5
|
|
|
Post by Mr.Scott on Jan 7, 2017 12:28:49 GMT -5
Those are XL's. They are TCCD chipped. They'll be fine for 478. Should do roughly 250 @ 2.5-3-3-6 @ 2.8v
|
|
|
Post by Shadyreaper on Jan 7, 2017 15:59:46 GMT -5
Those are XL's. They are TCCD chipped. They'll be fine for 478. Should do roughly 250 @ 2.5-3-3-6 @ 2.8v I didnt think about it but I looked in my AMD setup I got and damn if it didnt have these 256MBs in there there were 3 of them but only 2 slots so I will try to grab them 512s
|
|
|
Post by alpi on Apr 15, 2017 19:13:26 GMT -5
What do You think about the IC's on this sticks ? 1. (think it's BH-5 ) 2. (find NANYA NT5DS64M8BS-5T, don't know exactly how it's going )
|
|
|
Post by Mr.Scott on Apr 16, 2017 8:00:26 GMT -5
1) Most likely BH-5, but I have been surprised before with CH-5 pending the age of the sticks.
2) Nanya 5's are junk. 2-3-3-6 @ 2.85 = DDR460-470
|
|
|
Post by alpi on Apr 16, 2017 10:28:17 GMT -5
1) Most likely BH-5, but I have been surprised before with CH-5 pending the age of the sticks. 2) Nanya 5's are junk. 2-3-3-6 @ 2.85 = DDR460-470 Perfect ! I've bought the 2x256. It was on a crazy price anyway. (3 dollars = 1.000 Huf) Is there any efficincy loss because they are just 2x256 with 939 Athlon imc ? I think, there isn't any but You are the gurus !
|
|
|
Post by Mr.Scott on Apr 16, 2017 12:46:28 GMT -5
1) Most likely BH-5, but I have been surprised before with CH-5 pending the age of the sticks. 2) Nanya 5's are junk. 2-3-3-6 @ 2.85 = DDR460-470 Perfect ! I've bought the 2x256. It was on a crazy price anyway. (3 dollars = 1.000 Huf) Is there any efficincy loss because they are just 2x256 with 939 Athlon imc ? I think, there isn't any but You are the gurus ! No. As a matter of fact smaller sticks bench 2D faster on 939.
|
|
|
Post by Macsbeach98 on Apr 16, 2017 16:55:33 GMT -5
Those 256mb Corsair Sticks are the same as mine. Mine are good for DDR-533 2-2-2-5 @ 3.6v
|
|
|
Post by alpi on Apr 16, 2017 17:25:49 GMT -5
Those 256mb Corsair Sticks are the same as mine. Mine are good for DDR-533 2-2-2-5 @ 3.6v Good news ! I will be very happy if this kit can do such a timing like Yours ! My actual tight ddr1 can't go above 500 mhz with 2-3-2-5. Stop scaling from voltage above 3.4. Actually I had to lower freqs a bit lower from 500 for a succesfull spi32 today.
|
|
|
Post by Mr.Scott on Apr 16, 2017 20:07:25 GMT -5
Those 256mb Corsair Sticks are the same as mine. Mine are good for DDR-533 2-2-2-5 @ 3.6v I have a set also. Right about the same as yours.
|
|
|
Post by obscureparadox on Apr 16, 2017 20:29:19 GMT -5
It might be BH-6 also, just been playing with a similar kit and popped the heatspreader off to find it was BH-6. Same same as BH-5 just different manufacturing node.
|
|
|
Post by alpi on Jun 15, 2017 17:53:31 GMT -5
What do You think about this set ? I think they are the type what I looking for ! 2-2-2-6
|
|
|
Post by Mr.Scott on Jun 15, 2017 18:09:54 GMT -5
What do You think about this set ? I think they are the type what I looking for ! 2-2-2-6 BH-5
|
|
|
Post by alpi on Jun 16, 2017 4:18:31 GMT -5
Bought them for 6 Dollars including the post ! I hope they can do some nice clock ! Thx for Your help !
|
|
|
Post by Vinster on Jun 16, 2017 13:48:52 GMT -5
Bought them for 6 Dollars including the post ! I hope they can do some nice clock ! Thx for Your help ! Vin
|
|
|
Post by alpi on Jun 16, 2017 18:22:02 GMT -5
Sun is shining upon me ! I've just found another Hyperx Kit for sale ! I think they can be BH-5 also ! What's Your opinion ? Seller writes they are untested but the price is just a ridiculous 1.5 Dollars !
|
|
|
Post by Macsbeach98 on Jun 16, 2017 18:45:28 GMT -5
Good chance on those.
|
|
|
Post by kotori on Jun 17, 2017 5:37:01 GMT -5
I think that price does not to lose even if it's not BH's.
|
|
|
Post by ozz on Jun 17, 2017 6:00:53 GMT -5
I think that price does not to lose even if it's not BH's. ^^^^ this is correct, ram, cpu, gpu, motherboard you just never know what they will do
|
|
|
Post by alpi on Jun 24, 2017 4:14:53 GMT -5
Finally ! BH-5 in the house !!
|
|
|
Post by Mr.Scott on Jun 24, 2017 6:15:38 GMT -5
Which set is that?
|
|
|
Post by alpi on Jun 24, 2017 6:20:25 GMT -5
|
|
|
Post by Mr.Scott on Jun 24, 2017 6:54:30 GMT -5
You stole those. Nice buy.
|
|
|
Post by alpi on Mar 14, 2018 3:42:41 GMT -5
What do You think about KHX3200A/256 ? It's a double sided 2x256 kit.
|
|
|
Post by ozz on Mar 14, 2018 4:17:10 GMT -5
if you have a set or get a set and theyre any good, may well be a killer set , kingston has such a bitch of a reference to check. my guess, most likely BH-5's,
|
|
|
Post by Mr.Scott on Mar 14, 2018 9:52:32 GMT -5
What do You think about KHX3200A/256 ? It's a double sided 2x256 kit. Usually BH-5. I have a couple sets.
|
|
|
Post by alpi on Mar 14, 2018 10:30:02 GMT -5
Thx ! I'm going to buy them. Anyway, the seller told me a price that is more than ridiculous, so we can say there is no risk for me. :DDD I wish it will be my new Bh-5 kit, I will inform You about it.
|
|
|
Post by alpi on Mar 24, 2018 6:28:07 GMT -5
What do You think about KHX3200A/256 ? It's a double sided 2x256 kit. Usually BH-5. I have a couple sets. Hurrayy !! Seems it's BH-5 here too ! My second kit !
|
|
|
Post by dr4g00n on Mar 24, 2018 9:04:42 GMT -5
Alpi, give bios N4D623-2 a try for those Winbonds. Both of my Ultra-D's happily run DDR500+ CL1.5 on all Winbonds I've ran so far (CH-5, BH-6 & UTT) with that bios.
|
|
|
Post by alpi on Mar 24, 2018 11:27:01 GMT -5
Alpi, give bios N4D623-2 a try for those Winbonds. Both of my Ultra-D's happily run DDR500+ CL1.5 on all Winbonds I've ran so far (CH-5, BH-6 & UTT) with that bios. Thx for the tip ! I tryed to do cl1,5 but no chance maybe that bios has the way. Anyway this kit is single sided, the seller told wrong. My other kit is ds however both of them are 2x256. I'm so happy because this new kit seems obviously better than my old ! It needs a bit higher voltages at lower clocks but runs pretty well at highers. Yes, yes , yes !! :DD
|
|