|
Post by osmiumoc on Jan 28, 2022 9:24:26 GMT -5
I don't know how to copy the wazza. I've seen it used for many years though. 1 second difference. Good testing, thanks osmiumoc! I've learned it from Luumi:
|
|
|
Post by ShrimpBrime on Jan 28, 2022 12:42:26 GMT -5
I don't know how to copy the wazza. I've seen it used for many years though. 1 second difference. Good testing, thanks osmiumoc! I've learned it from Luumi: I may have to check it out. Rig is all apart right now. But honestly is it worth it to run copy waza?
|
|
|
Post by Mr.Scott on Jan 28, 2022 13:55:26 GMT -5
Yes, waza is worth it. OCXSPI Tweaker does everything for you. Check it out. SpiTweaker_v1.06.zip (69.8 KB)
|
|
|
Post by ShrimpBrime on Jan 28, 2022 21:22:09 GMT -5
Yes, waza is worth it. OCXSPI Tweaker does everything for you. Check it out. <button disabled="" class="c-attachment-insert--linked o-btn--sm">Attachment Deleted</button> I will, thank you 😊
|
|
|
Post by ground on Jan 29, 2022 11:50:05 GMT -5
Sandbags or no sandbags?
|
|
|
Post by Mr.Scott on Jan 29, 2022 12:04:29 GMT -5
lol Doesn't matter. Best score wins anyway.
|
|
|
Post by ShrimpBrime on Jan 29, 2022 13:33:27 GMT -5
What a good comp. Some very impressive shit going on!
|
|
|
Post by ShrimpBrime on Jan 30, 2022 2:16:02 GMT -5
Getting close, 1366 set up Go Brrrrr
|
|
|
Post by ShrimpBrime on Feb 13, 2022 13:34:53 GMT -5
Does anyone have X265 4K that I can download? HWBot isn't working for me to DL it.
|
|
|
Post by Mr.Scott on Feb 13, 2022 14:04:36 GMT -5
Does anyone have X265 4K that I can download? HWBot isn't working for me to DL it. 1drv.ms/u/s!Akv2fO-y-lM7i2l4yJiHFpvDfucS?e=GHFlJd
|
|
|
Post by ShrimpBrime on Feb 13, 2022 15:00:43 GMT -5
Does anyone have X265 4K that I can download? HWBot isn't working for me to DL it. 1drv.ms/u/s!Akv2fO-y-lM7i2l4yJiHFpvDfucS?e=GHFlJd Thanks Scotty. See if I can't get a thing going before kick-off.
|
|
|
Post by Mr.Scott on Feb 13, 2022 15:09:49 GMT -5
265 4K is a tough bench. Likes voltage, heats your shit up like a blowtorch.
|
|
|
Post by ShrimpBrime on Feb 13, 2022 21:08:42 GMT -5
265 4K is a tough bench. Likes voltage, heats your shit up like a blowtorch. I battled that for about 4 hours. Even hit an unexpected cold bug. It only got worse from there, so my Submission was one of 3 actual successful runs making it 80-90% with blue screens. Am using a larger amount of Acetone to see if results would be better on the cooling end, turns out too much is not always a good thing. Battled a good boil-over though. The last hour battling cold bugs, or at least I think so. Not sure, but it's snafu since I broke the seating of the thermal paste. Ah well, it's been good fun so far. And a lucrative socket to bench on.
|
|
|
Post by ShrimpBrime on Feb 17, 2022 21:57:19 GMT -5
Did it.
Got the Liquid Nitrogen.
In the Dewar.
Full.
22 Litre.
Have anxiety.
|
|
|
Post by Macsbeach98 on Feb 18, 2022 0:47:07 GMT -5
I will have nitrogen on the 24th
|
|
|
Post by Bones on Feb 18, 2022 1:14:58 GMT -5
Did it. Got the Liquid Nitrogen. In the Dewar. Full. 22 Litre. Have anxiety. Pour out your anxieties into the pot and let 'er rip!
|
|
|
Post by ShrimpBrime on Feb 18, 2022 18:57:38 GMT -5
Did it. Got the Liquid Nitrogen. In the Dewar. Full. 22 Litre. Have anxiety. Pour out your anxieties into the pot and let 'er rip! Maybe tonight, may pour some anxiety into the pot Wish I could do streaming like you Bones. Its really neat that you do that; it's inspiring to me!
|
|
|
Post by ShrimpBrime on Feb 19, 2022 16:44:08 GMT -5
Cold bug city... The Dry Ice was more stable. It's the board for sure.
|
|
|
Post by ground on Feb 19, 2022 17:52:18 GMT -5
Was testing some GB3 Singlecore today since I was bored... This E5630 does GB3 Single core at clocks much higher then 32M quite easily. Sadly max BCLK the board can boot, so only way I can beat this score is by taking CPU and mem cold and running tighter mem and higher uncore.
|
|
|
Post by Bones on Feb 19, 2022 20:56:31 GMT -5
Pour out your anxieties into the pot and let 'er rip! Maybe tonight, may pour some anxiety into the pot Wish I could do streaming like you Bones. Its really neat that you do that; it's inspiring to me! I can help guide you anytime about a setup. Not as hard to do as I thought it would be once I was into it, the expense to get what you need isn't that bad either, if you really need anything that is. I'd bet you have at least an extra system lying around in pieces somewhere that would work.
|
|
|
Post by Macsbeach98 on Feb 19, 2022 22:36:32 GMT -5
Cold bug city... The Dry Ice was more stable. It's the board for sure. Its not the board its the CPU this isnt AM3 you wont be running full pot here. The best I have had out of X58 is about -130 some only go to -100 a thermometer is needed at the bottom of the pot and a blowtorch to bring the temp back up and after about 20 mins of fuking around you will know where the temp is that it will lock then you dont go under it. My QX9650 only goes down to -90 same as my X5960 X99 both are locked at -100
|
|
|
Post by Bones on Feb 19, 2022 23:32:19 GMT -5
Agreed - Most Intel chips I know of have a CB/CBB and you have to figure out where it is with the chip and go with it that way.
A thermal probe is required to zero in on the temp it bugs out at. You can get one cheap off of fleabay with a K type probe, may not be accurate per actual temp reading BUT going by the value it shows will let you use and work with it to maintain temps where they need to be.
Already know my probe is way off but since it's consistent in what it shows, actual thermal accuracy is not problem. I can go by what it does show me and manage temps just fine since I've gotten used to how it reads which BTW is way too high. Mine only says for example -139c at full pot even if the system isn't running, so that can't be right but in terms of what it says when a chip bugs out I just go by the value it gives and work from there.
|
|
|
Post by Macsbeach98 on Feb 20, 2022 0:02:14 GMT -5
Rodney you are using a multimeter with a temp socket on it I noticed in your video. Yes I do watch them good job actually. I used to use the same at first and yes -140c was the lowest it would show. But that would do fine for Jon.
|
|
|
Post by ShrimpBrime on Feb 20, 2022 1:28:05 GMT -5
Rodney you are using a multimeter with a temp socket on it I noticed in your video. Yes I do watch them good job actually. I used to use the same at first and yes -140c was the lowest it would show. But that would do fine for Jon. I use the MDTechPlus from Matco tools. www.matcotools.com/catalog/product/MDTECHPLUS/advanced-technician-meter/ It's a Fluke design. Works pretty good. I've seen it reporting temps as low as -174c in previous setups. Am not using it at this time, but if bios is accurate enough, -114c is about as cold as I can get it. Trying to keep 2.0v or more under control with my little Dice pot is super duper difficult. It has a horrible temp gradient. But don't let that stop me. Been trying. Burned through 10L in 2 days. ground - Will update your score in the morning. Well when I wake up. 12:35AM here now, hanging up the benching for the night. Was able to improve at least one score.
|
|
|
Post by Macsbeach98 on Feb 20, 2022 4:58:10 GMT -5
A simple test for a thermometer put the probe in the dewar down into the nitrogen should drop down to -195c
|
|
|
Post by ShrimpBrime on Feb 20, 2022 16:57:36 GMT -5
A simple test for a thermometer put the probe in the dewar down into the nitrogen should drop down to -195c Yeah need proof. I get it. I'd give the original from the phone taken sub 5 minutes ago, but the forum won't let us upload 6mb Jpeg pictures. So my apologies for that. Also made a special trip to work, because that's what I use this meter for. But looks like 20c off. This is the sensor dipped in LN2. I expected 10c, but I suppose it's time for a new multimeter. This one is over 10 years old now.
|
|
|
Post by georgekokovinis on Feb 20, 2022 17:15:03 GMT -5
Just for history, cpu temp sensor on Rex III is way off. Last time I benched on Dice it showed -114c. So, no real help from there.
|
|
|
Post by ShrimpBrime on Feb 20, 2022 17:41:15 GMT -5
Just for history, cpu temp sensor on Rex III is way off. Last time I benched on Dice it showed -114c. So, no real help from there. I just need to find a proper LN2 pot George. That's all it really is.
|
|
|
Post by Bones on Feb 20, 2022 17:55:02 GMT -5
They are out there but hard to find these days without buying a new one.
Of course a T-Rex would do it but those things are huge and may not work with your setup anyway, it's footprint is so damn big it may get into components surrounding the socket. KPC used to make and sell smaller pots too, I don't know why they stopped making the smaller footprint pots but find one of those and you're golden.
There is one made by a company called Bitspower (Taiwanese make) currently in production but it's kinda light on the mass so it may not hold temps under load as well but would still do the job.
Finding a good pot that has the smaller footprint these days may be a challenge to find and get without breaking the bank but they are out there, hidden in some retired OC'ers cubbard..... Somewhere.
I'll need to look around and see what I can come up with and add that to the resourse thread list I started last week.
EDIT: Found it and added that to the resource list.
|
|
|
Post by georgekokovinis on Feb 20, 2022 18:16:40 GMT -5
Usually deals over the big pond fail due to shipping costs.
But, what the hell, I will mention it. I have a der8auer fusion 3.1 pot, complete, boxed, insulated and with a high qualty probe. It is stored away, in mint condition, since I am using Kingpin F1 with extension pot or T rex for big cpus.
I remember paying 215 euros back then. Perfect both for Dice and LN2 for not very demanding cpus
For you Jon I will be more than happy to let it go for 100. Shipping is the problem.
|
|