Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 17, 2021 6:15:50 GMT -5
Thinking of trying dice again on the 3090. Ive killed a bit using dice in the past so could do with some help. Im thinking plaster gpu in vaseline and making sure i take it to at least -15 before switching off . Ill cover slots on board near gpu with dielectric grease and also use paper towel as usual . Vince told me to make it warmer before switching off so first time for me . Any other help i can get would be appreciated . Thanks guys
|
|
|
Post by ShrimpBrime on Feb 17, 2021 9:21:25 GMT -5
Again?
Why have you submitted benches with Dice and claim a different cooling type?
Please correct your submissions with the correct cooling so you are placed in the correct league. If you cannot figure out how to, please see one of our team admin for assistance.
|
|
|
Post by ShrimpBrime on Feb 17, 2021 9:27:50 GMT -5
Pardon my last post. I think Dry Ice is not extreme league. My apologies.
(I'm not 100% sure without looking though)
|
|
|
Post by Bones on Feb 17, 2021 11:08:19 GMT -5
DICE (Dry Ice) is Apprentice league, not Extreme. Anything from Cascade or better is Extreme league with Cascade itself fitting between DICE and Ln2. Since a good cascade setup can easily outcool DICE it's considered Extreme league cooling.
|
|
|
Post by ShrimpBrime on Feb 17, 2021 13:51:53 GMT -5
Thanks Bones. I had thought Dice was extreme, probably should be. Really anything sub zero in my opinion....
All good. Thanks for the heads up.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 17, 2021 16:10:21 GMT -5
What is your problem ? The scores i have put up all year are on phase change . Its pretty obvious if you check out all my clock speeds On dice , i would be similar speed to george ie. 3 or 400 MHz higher . If you dont want to help , fine .
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 17, 2021 16:16:52 GMT -5
I tried out dice last year and was unable to run anything due to condensation killing my hardware. I agree that dice (-80) should not be apprentice league. My phase can go to -35 on the head at idle and cpu temp of + 30 to +40 on load . Its HWBOT rules shrimpbrine if you care to check them out before having a go at me, again .
|
|
|
Post by georgekokovinis on Feb 17, 2021 16:19:34 GMT -5
What is your problem ? The scores i have put up all year are on phase change . Its pretty obvious if you check out all my clock speeds On dice , i would be similar speed to george ie. 3 or 400 MHz higher . If you dont want to help , fine . Single stage phase change cooling device and DICE do not have 300 to 400mhz difference, given the same HW. Maybe 100 to 150 MAX.
|
|
|
Post by georgekokovinis on Feb 17, 2021 16:25:48 GMT -5
And DICE is not -80. Wish it was. -67 idle at the base of the pot.
I also agree that many HWBOT rules are wrong. This is not one of them.
Next cooling level is -125 to -150. Cascades.
How can we compare -70 to - 150 ?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 17, 2021 16:30:54 GMT -5
I agree with the latter george . I just wish i was as good as you with dice but im not . On another note , i ask for help and get attacked by a moderator. All ive done here is try to make good scores for the team . Ive never attacked anyone and always been civil to everyone here . I dont feel very welcome here at the moment.
|
|
|
Post by georgekokovinis on Feb 17, 2021 16:51:44 GMT -5
TBH,
The only people in our Team that can offer real help insulating a gpu are Bullant and Macsbeach.
I have been tempted many times, I have 2 gpu pots from Vince, but they are still in their boxes.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 17, 2021 17:49:32 GMT -5
I know bullants . Hes been to my place before and we overclocked for hours . A very nice guy . Be a dream come to true if we could do it again . Surely one of the best in the world.
|
|
|
Post by ShrimpBrime on Feb 17, 2021 21:29:40 GMT -5
I tried out dice last year and was unable to run anything due to condensation killing my hardware. I agree that dice (-80) should not be apprentice league. My phase can go to -35 on the head at idle and cpu temp of + 30 to +40 on load . Its HWBOT rules shrimpbrine if you care to check them out before having a go at me, again . I made a simple mistake and acknowledged it already. You don't need two posts to point that out continuously. If you read, which I think you are able too..... I said my apologies. If that's not good enough for you, tough shit. Deal with it.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 18, 2021 0:29:10 GMT -5
Ok We will leave it at that then .
|
|